Fix your GP2X TV-Out Cable



(click on the picture to get large size, opens in new window)



1. I filed a little bit from the side with the pins (the end you stick into the GP2X), carefully.

Click to open large size in new window

Click to open large size in new window

2. I filed the side with the grooves, once again careful to keep it square.

Click to open large size in new window

Click to open large size in new window

3. Then I took an ordinary piece of 3x5 card, cut out a rectangle with one dimension the same width as the TV dongles connector and bent it into an L shape (the bottom of the L being the distance from the TV connector's shell to the end of the connector, the part that goes inside the GP2X)

Click to open large size in new window

4. I took the L of card paper and placed it into the GP2X EXT connector with the vertical part of the L pointing toward me as I looked at the screen, I then carefully pushed in the TV cable.

Click to open large size in new window

Click to open large size in new window

IT WORKED, and I don't mean like it did before:

NO AMOUNT OF MODERATE WIGGLING EVEN BUDGED THE PICTURE ON MY TV SCREEN.