Internet über Bluetooth mit LG GS500


Sebo

Still Fresh
Joined
Oct 14, 2008
Messages
26
Hi,
habe meine Pandora vor Kurzem erhalten und soweit funktioniert alles schon ganz gut (Emulatoren,
Internet über WLAN, Homebrew, Ebooks, usw...)
Aber beim Versuch, mit meinem Handy über Bluetooth online zu gehn, bin ich jetzt langsam am
Verzweifeln.....
Ich benutze das LG GS500, auch Cookie Plus genannt und es sollte funktionieren, im Manual wird
explizit erwähnt, das Tethering über Bluetooth und USB möglich ist (da ist zwar von einem Programm
die Rede, das auf dem "PC" ausgeführt werden muss, aber Hardware-technisch sollte es generell
möglich sein)

Bin leider ein absoluter Noob in Sachen Linux, ich habe es allerdings geschafft, mit diesem Guide --->
http://wiki.ubuntuusers.de/Bluetooth/Mobile#source-2

und speziell dem Befehl:

sudo /usr/bin/rfcomm connect 0 xx:xx:xx:xx:xx:xx 1

(xx:xx:xx:xx:xx:xx steht für die MAC-Adresse meines Handys)

eine Netzwerkverbindung per Bluetooth herzustellen, mein Handy zeigt das im Display auch an.
Leider komme ich aber dann einfach nicht weiter, im Menü ist kein Programm, dass diese Verbindung
nutzen könnte, der Network-Manager zeigt keine entsprechende Verbindung an, und der Browser will
auch nich online gehn...
Im Bluetooth-Manager wird das Handy nur als Phone, nicht aber als Modem angezeigt und wenn ich es
paire, wird auch nicht (wie in ED´s Video) zum Abschluss gefragt, ob ich die Internetverbindung des
Handys nutzen will...

USB ist auch keine Option, da wird das Handy weder im Modem-, noch im Speicher-Modus erkannt,
Neustart mit angeschlossenem USB-Kabel + Handy hilft auch nich,

sudo lsusb

zeigt nur:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Um auch dieser Frage vorweg zu greifen, der USB-Anschluss des Handys ist 2.0, es wird auch beim
Anschließen darüber aufgeladen.....

Also, ich bin mit meinem Latein langsam am Ende, wäre für jede Hilfe dankbar....

(Und bitte sagt mir nicht, dass ich die Firmware neu flashen soll, ich kann mir einfach nicht vorstellen,
dass es daran liegen soll, ansonst funktioniert ja eigentlich alles nahezu perfekt)

Mfg Sebo
 
Poste mal bitte dmesg und

einmal das syslog bei connection.

Sonst endet das ganze in ner Kristallkugel Runde.
 
Also, hier ist, was "Gertrud" (so hab ich meine Pandora benannt^^) bei dmesg ausgibt.....

Wenn das Handy über den oben erwähnten Befehl connected wurde:
Gertrud:~$ dmesg
hw_ep 6tx, max 512
[ 10.484222] musb_hdrc: hw_ep 6rx, max 512
[ 10.484222] musb_hdrc: hw_ep 7tx, max 512
[ 10.484222] musb_hdrc: hw_ep 7rx, max 512
[ 10.484252] musb_hdrc: hw_ep 8tx, max 512
[ 10.484252] musb_hdrc: hw_ep 8rx, max 512
[ 10.484283] musb_hdrc: hw_ep 9tx, max 512
[ 10.484283] musb_hdrc: hw_ep 9rx, max 512
[ 10.484313] musb_hdrc: hw_ep 10tx, max 512
[ 10.484313] musb_hdrc: hw_ep 10rx, max 512
[ 10.484313] musb_hdrc: hw_ep 11tx, max 512
[ 10.484344] musb_hdrc: hw_ep 11rx, max 512
[ 10.484344] musb_hdrc: hw_ep 12tx, max 512
[ 10.484375] musb_hdrc: hw_ep 12rx, max 512
[ 10.484375] musb_hdrc: hw_ep 13tx, max 512
[ 10.484405] musb_hdrc: hw_ep 13rx, max 512
[ 10.484405] musb_hdrc: hw_ep 14shared, max 1024
[ 10.484405] musb_hdrc: hw_ep 15shared, max 1024
[ 10.484466] musb_hdrc: USB OTG mode controller at d80ab000 using PIO, IRQ 92
[ 10.505920] Bluetooth: Core ver 2.13
[ 10.506347] NET: Registered protocol family 31
[ 10.506378] Bluetooth: HCI device and connection manager initialized
[ 10.506378] Bluetooth: HCI socket layer initialized
[ 10.509490] NET: Registered protocol family 2
[ 10.513427] Switched to high resolution mode on CPU 0
[ 10.576080] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 10.576660] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 10.576873] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 10.577026] TCP: Hash tables configured (established 8192 bind 8192)
[ 10.577026] TCP reno registered
[ 10.599517] NET: Registered protocol family 1
[ 10.600860] NetWinder Floating Point Emulator V0.97 (double precision)
[ 10.603057] VFS: Disk quotas dquot_6.5.1
[ 10.603179] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.603698] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.605865] aufs 2-27
[ 10.605895] msgmni has been set to 485
[ 10.605987] io scheduler noop registered
[ 10.605987] io scheduler anticipatory registered (default)
[ 10.606018] io scheduler deadline registered
[ 10.606170] io scheduler cfq registered
[ 10.628112] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 10.650970] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 10.651000] console [ttyS0] enabled
[ 11.093994] brd: module loaded
[ 11.101837] loop: module loaded
[ 11.105041] pndctrl loaded.
[ 11.108428] usbcore: registered new interface driver asix
[ 11.114135] usbcore: registered new interface driver cdc_ether
[ 11.120269] usbcore: registered new interface driver rndis_host
[ 11.126312] i2c /dev entries driver
[ 11.131774] input: power-button as /devices/virtual/input/input0
[ 11.162017] triton2 power button driver initialized
[ 11.168579] Driver 'sd' needs updating - please use bus_type methods
[ 11.175506] omap2-nand driver initializing
[ 11.180816] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 11.189971] cmdlinepart partition parsing not available
[ 11.195281] Creating 5 MTD partitions on "omap2-nand":
[ 11.200439] 0x00000000-0x00080000 : "xloader"
[ 11.205688] 0x00080000-0x00260000 : "uboot"
[ 11.211212] 0x00260000-0x00280000 : "uboot-env"
[ 11.216339] 0x00280000-0x00c80000 : "boot"
[ 11.225189] 0x00c80000-0x20000000 : "rootfs"
[ 11.439117] UBI: attaching mtd4 to ubi0
[ 11.443023] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 11.449310] UBI: logical eraseblock size: 129024 bytes
[ 11.454772] UBI: smallest flash I/O unit: 2048
[ 11.459533] UBI: sub-page size: 512
[ 11.464172] UBI: VID header offset: 512 (aligned 512)
[ 11.470062] UBI: data offset: 2048
[ 12.724273] UBI: attached mtd4 to ubi0
[ 12.728118] UBI: MTD device name: "rootfs"
[ 12.733245] UBI: MTD device size: 499 MiB
[ 12.738220] UBI: number of good PEBs: 3963
[ 12.742980] UBI: number of bad PEBs: 33
[ 12.747528] UBI: max. allowed volumes: 128
[ 12.752197] UBI: wear-leveling threshold: 4096
[ 12.756958] UBI: number of internal volumes: 1
[ 12.761413] UBI: number of user volumes: 1
[ 12.765930] UBI: available PEBs: 0
[ 12.770385] UBI: total number of reserved PEBs: 3963
[ 12.775390] UBI: number of PEBs reserved for bad PEB handling: 39
[ 12.781555] UBI: max/mean erase counter: 32/4
[ 12.785919] UBI: image sequence number: 1167947814
[ 12.790802] UBI: attaching mtd3 to ubi1
[ 12.794708] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 12.800994] UBI: logical eraseblock size: 129024 bytes
[ 12.806457] UBI: smallest flash I/O unit: 2048
[ 12.811218] UBI: sub-page size: 512
[ 12.815856] UBI: VID header offset: 512 (aligned 512)
[ 12.821746] UBI: data offset: 2048
[ 12.828613] UBI: background thread "ubi_bgt0d" started, PID 355
[ 12.871582] UBI: attached mtd3 to ubi1
[ 12.875457] UBI: MTD device name: "boot"
[ 12.880371] UBI: MTD device size: 10 MiB
[ 12.885284] UBI: number of good PEBs: 80
[ 12.889862] UBI: number of bad PEBs: 0
[ 12.894348] UBI: max. allowed volumes: 128
[ 12.899017] UBI: wear-leveling threshold: 4096
[ 12.903747] UBI: number of internal volumes: 1
[ 12.908233] UBI: number of user volumes: 1
[ 12.912719] UBI: available PEBs: 0
[ 12.917175] UBI: total number of reserved PEBs: 80
[ 12.922027] UBI: number of PEBs reserved for bad PEB handling: 2
[ 12.928100] UBI: max/mean erase counter: 7/4
[ 12.932373] UBI: image sequence number: 669794559
[ 12.937164] usbmon: debugfs is not available
[ 12.941833] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 12.947723] UBI: background thread "ubi_bgt1d" started, PID 358
[ 12.954010] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 12.961853] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 12.982177] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 12.990325] usb usb1: configuration #1 chosen from 1 choice
[ 12.996276] hub 1-0:1.0: USB hub found
[ 13.000152] hub 1-0:1.0: 3 ports detected
[ 13.108428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.115325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.122589] usb usb1: Product: OMAP-EHCI Host Controller
[ 13.127960] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd
[ 13.134216] usb usb1: SerialNumber: ehci-omap.0
[ 13.139068] Initializing USB Mass Storage driver...
[ 13.144226] usbcore: registered new interface driver usb-storage
[ 13.150329] USB Mass Storage support registered.
[ 13.155273] usbcore: registered new interface driver libusual
[ 13.161621] mice: PS/2 mouse device common for all mice
[ 13.186309] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 13.272277] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2
[ 13.335815] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3
[ 13.397003] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4
[ 13.459686] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 13.470794] bq27x00-battery 3-0055: support ver. 1.1.0 enabled
[ 13.477050] Bluetooth: HCI UART driver ver 2.2
[ 13.481536] Bluetooth: HCI H4 protocol initialized
[ 13.486419] Bluetooth: HCILL protocol initialized
[ 13.491241] hci_h4p hci_h4p: Registering HCI H4P device
[ 13.647186] mmci-omap mmci-omap.0: Failed to get debounce clock
[ 13.755737] mmci-omap mmci-omap.1: Failed to get debounce clock
[ 13.756774] mmci-omap mmci-omap.2: Failed to get debounce clock
[ 13.757629] Registered led device: pandora::sd1
[ 13.762512] Registered led device: pandora::sd2
[ 13.767395] Registered led device: pandora::bluetooth
[ 13.772796] Registered led device: pandora::wifi
[ 13.778259] Registered led device: pandora::keypad_bl
[ 13.783721] Registered led device: pandora::power
[ 13.788970] Registered led device: pandora::charger
[ 13.794464] usbcore: registered new interface driver usbhid
[ 13.800140] usbhid: v2.6:USB HID core driver
[ 13.804962] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 13.811828] ASoC version 0.13.2
[ 13.815277] OMAP3 Pandora SoC init
[ 13.819091] TWL4030 Audio Codec init
[ 13.824310] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 13.831268] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok
[ 13.845550] ALSA device list:
[ 13.848541] #0: omap3pandora (twl4030)
[ 13.852844] TCP cubic registered
[ 13.856079] NET: Registered protocol family 17
[ 13.860626] NET: Registered protocol family 15
[ 13.865173] Bluetooth: L2CAP ver 2.11
[ 13.868865] Bluetooth: L2CAP socket layer initialized
[ 13.873992] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.878540] Bluetooth: SCO socket layer initialized
[ 13.883605] Bluetooth: RFCOMM socket layer initialized
[ 13.888854] Bluetooth: RFCOMM TTY layer initialized
[ 13.893768] Bluetooth: RFCOMM ver 1.10
[ 13.897613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.902954] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 13.909484] RPC: Registered udp transport module.
[ 13.914245] RPC: Registered tcp transport module.
[ 13.919036] ThumbEE CPU extension supported.
[ 13.923370] Disabling unused clock "sr2_fck"
[ 13.923400] Disabling unused clock "sr1_fck"
[ 13.923400] Disabling unused clock "mcbsp_fck"
[ 13.923431] Disabling unused clock "mcbsp_fck"
[ 13.923431] Disabling unused clock "mcbsp_fck"
[ 13.923461] Disabling unused clock "mcbsp_ick"
[ 13.923461] Disabling unused clock "mcbsp_ick"
[ 13.923492] Disabling unused clock "mcbsp_ick"
[ 13.923492] Disabling unused clock "gpt2_ick"
[ 13.923522] Disabling unused clock "gpt3_ick"
[ 13.923522] Disabling unused clock "gpt4_ick"
[ 13.923553] Disabling unused clock "gpt5_ick"
[ 13.923553] Disabling unused clock "gpt6_ick"
[ 13.923553] Disabling unused clock "gpt7_ick"
[ 13.923583] Disabling unused clock "gpt8_ick"
[ 13.923583] Disabling unused clock "gpt9_ick"
[ 13.923614] Disabling unused clock "wdt3_ick"
[ 13.923614] Disabling unused clock "wdt3_fck"
[ 13.923645] Disabling unused clock "gpio2_dbck"
[ 13.923645] Disabling unused clock "gpio3_dbck"
[ 13.923675] Disabling unused clock "gpio5_dbck"
[ 13.923675] Disabling unused clock "gpt9_fck"
[ 13.923706] Disabling unused clock "gpt8_fck"
[ 13.923706] Disabling unused clock "gpt7_fck"
[ 13.923706] Disabling unused clock "gpt6_fck"
[ 13.923736] Disabling unused clock "gpt5_fck"
[ 13.923736] Disabling unused clock "gpt4_fck"
[ 13.923767] Disabling unused clock "gpt3_fck"
[ 13.923767] Disabling unused clock "gpt2_fck"
[ 13.923797] Disabling unused clock "gpt1_ick"
[ 13.923797] Disabling unused clock "wdt1_ick"
[ 13.923828] Disabling unused clock "wdt2_ick"
[ 13.923828] Disabling unused clock "wdt2_fck"
[ 13.923858] Disabling unused clock "gpio1_dbck"
[ 13.923858] Disabling unused clock "gpt1_fck"
[ 13.923858] Disabling unused clock "cam_ick"
[ 13.923889] Disabling unused clock "cam_mclk"
[ 13.923889] Disabling unused clock "des1_ick"
[ 13.923919] Disabling unused clock "sha11_ick"
[ 13.923919] Disabling unused clock "rng_ick"
[ 13.923950] Disabling unused clock "aes1_ick"
[ 13.923950] Disabling unused clock "ssi_ick"
[ 13.923980] Disabling unused clock "mailboxes_ick"
[ 13.923980] Disabling unused clock "mcbsp_ick"
[ 13.923980] Disabling unused clock "mcbsp_ick"
[ 13.924011] Disabling unused clock "gpt10_ick"
[ 13.924011] Disabling unused clock "gpt11_ick"
[ 13.924041] Disabling unused clock "uart2_ick"
[ 13.924041] Disabling unused clock "i2c_ick"
[ 13.924072] Disabling unused clock "hdq_ick"
[ 13.924072] Disabling unused clock "mspro_ick"
[ 13.924102] Disabling unused clock "des2_ick"
[ 13.924102] Disabling unused clock "sha12_ick"
[ 13.924102] Disabling unused clock "aes2_ick"
[ 13.924133] Disabling unused clock "icr_ick"
[ 13.924133] Disabling unused clock "pka_ick"
[ 13.924163] Disabling unused clock "ssi_ssr_fck"
[ 13.924163] Disabling unused clock "hdq_fck"
[ 13.924194] Disabling unused clock "uart2_fck"
[ 13.924194] Disabling unused clock "mcbsp_fck"
[ 13.924224] Disabling unused clock "mcbsp_fck"
[ 13.924224] Disabling unused clock "i2c_fck"
[ 13.924224] Disabling unused clock "mspro_fck"
[ 13.924255] Disabling unused clock "gpt11_fck"
[ 13.924255] Disabling unused clock "gpt10_fck"
[ 13.924285] Disabling unused clock "iva2_ck"
[ 13.924285] Disabling unused clock "dpll4_m6x2_ck"
[ 13.924316] Disabling unused clock "dpll4_m5x2_ck"
[ 13.924346] Disabling unused clock "dpll3_m3x2_ck"
[ 13.924346] Disabling unused clock "sys_clkout1"
[ 13.924377] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 13.964202] Console: switching to colour frame buffer device 100x30
[ 14.148590] twl4030_rtc twl4030_rtc: setting system clock to 2011-02-01 16:11:34 UTC (1296576694)
[ 14.257080] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 14.263153] UBIFS: file system size: 504354816 bytes (492534 KiB, 480 MiB, 3909 LEBs)
[ 14.271270] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 14.278625] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 14.284515] UBIFS: default compressor: lzo
[ 14.288665] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 14.295471] VFS: Mounted root (ubifs filesystem).
[ 14.300354] Freeing init memory: 148K
[ 14.740173] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 14.748382] mmc0: new high speed SDHC card at address b368
[ 14.754577] mmcblk0: mmc0:b368 SD 15857664KiB
[ 14.759643] mmcblk0: p1
[ 15.010070] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 15.018280] mmc1: new SD card at address e624
[ 15.023406] mmcblk1: mmc1:e624 SU01G 992000KiB
[ 15.028228] mmcblk1: p1
[ 21.354888] ads7846 spi1.0: touchscreen, irq 254
[ 21.360321] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 26.085113] FAT: bogus number of reserved sectors
[ 26.089843] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 26.113525] FAT: bogus number of reserved sectors
[ 26.118408] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 26.380889] FAT: bogus number of reserved sectors
[ 26.385620] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 26.430389] FAT: bogus number of reserved sectors
[ 26.435150] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 27.855712] NET: Registered protocol family 10
[ 28.092620] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 28.098510] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 28.105957] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 28.113250] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 28.119140] UBIFS: default compressor: lzo
[ 28.123260] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 28.795349] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 29.037567] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 72.347503] firmware: requesting brf6300.bin
[ 72.791320] hci_h4p hci_h4p: BT hci up and running.

Wenn es per USB angeschlossen und im Modem-Modus ist:
Gertrud:~$ dmesg
0rx, max 512
[ 751.869659] musb_hdrc: hw_ep 11tx, max 512
[ 751.869659] musb_hdrc: hw_ep 11rx, max 512
[ 751.869689] musb_hdrc: hw_ep 12tx, max 512
[ 751.869689] musb_hdrc: hw_ep 12rx, max 512
[ 751.869689] musb_hdrc: hw_ep 13tx, max 512
[ 751.869720] musb_hdrc: hw_ep 13rx, max 512
[ 751.869720] musb_hdrc: hw_ep 14shared, max 1024
[ 751.869750] musb_hdrc: hw_ep 15shared, max 1024
[ 751.869781] musb_hdrc: USB OTG mode controller at d80ab000 using PIO, IRQ 92
[ 751.891296] Bluetooth: Core ver 2.13
[ 751.891723] NET: Registered protocol family 31
[ 751.891723] Bluetooth: HCI device and connection manager initialized
[ 751.891754] Bluetooth: HCI socket layer initialized
[ 751.894836] NET: Registered protocol family 2
[ 751.898773] Switched to high resolution mode on CPU 0
[ 751.961456] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 751.962005] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 751.962249] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 751.962371] TCP: Hash tables configured (established 8192 bind 8192)
[ 751.962402] TCP reno registered
[ 751.984863] NET: Registered protocol family 1
[ 751.986206] NetWinder Floating Point Emulator V0.97 (double precision)
[ 751.988403] VFS: Disk quotas dquot_6.5.1
[ 751.988494] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 751.989044] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 751.991180] aufs 2-27
[ 751.991241] msgmni has been set to 485
[ 751.991302] io scheduler noop registered
[ 751.991333] io scheduler anticipatory registered (default)
[ 751.991333] io scheduler deadline registered
[ 751.991516] io scheduler cfq registered
[ 752.013427] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 752.036285] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 752.036346] console [ttyS0] enabled
[ 752.479339] brd: module loaded
[ 752.487152] loop: module loaded
[ 752.490356] pndctrl loaded.
[ 752.493774] usbcore: registered new interface driver asix
[ 752.499450] usbcore: registered new interface driver cdc_ether
[ 752.505584] usbcore: registered new interface driver rndis_host
[ 752.511627] i2c /dev entries driver
[ 752.517089] input: power-button as /devices/virtual/input/input0
[ 752.547363] triton2 power button driver initialized
[ 752.553924] Driver 'sd' needs updating - please use bus_type methods
[ 752.560852] omap2-nand driver initializing
[ 752.566131] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 752.575317] cmdlinepart partition parsing not available
[ 752.580627] Creating 5 MTD partitions on "omap2-nand":
[ 752.585784] 0x00000000-0x00080000 : "xloader"
[ 752.591033] 0x00080000-0x00260000 : "uboot"
[ 752.596557] 0x00260000-0x00280000 : "uboot-env"
[ 752.601684] 0x00280000-0x00c80000 : "boot"
[ 752.610534] 0x00c80000-0x20000000 : "rootfs"
[ 752.824462] UBI: attaching mtd4 to ubi0
[ 752.828399] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 752.834686] UBI: logical eraseblock size: 129024 bytes
[ 752.840148] UBI: smallest flash I/O unit: 2048
[ 752.844909] UBI: sub-page size: 512
[ 752.849548] UBI: VID header offset: 512 (aligned 512)
[ 752.855438] UBI: data offset: 2048
[ 754.109161] UBI: attached mtd4 to ubi0
[ 754.113037] UBI: MTD device name: "rootfs"
[ 754.118133] UBI: MTD device size: 499 MiB
[ 754.123138] UBI: number of good PEBs: 3963
[ 754.127899] UBI: number of bad PEBs: 33
[ 754.132446] UBI: max. allowed volumes: 128
[ 754.137115] UBI: wear-leveling threshold: 4096
[ 754.141876] UBI: number of internal volumes: 1
[ 754.146331] UBI: number of user volumes: 1
[ 754.150817] UBI: available PEBs: 0
[ 754.155303] UBI: total number of reserved PEBs: 3963
[ 754.160308] UBI: number of PEBs reserved for bad PEB handling: 39
[ 754.166473] UBI: max/mean erase counter: 32/4
[ 754.170837] UBI: image sequence number: 1167947814
[ 754.175720] UBI: attaching mtd3 to ubi1
[ 754.179565] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 754.185913] UBI: logical eraseblock size: 129024 bytes
[ 754.191375] UBI: smallest flash I/O unit: 2048
[ 754.196136] UBI: sub-page size: 512
[ 754.200775] UBI: VID header offset: 512 (aligned 512)
[ 754.206665] UBI: data offset: 2048
[ 754.213531] UBI: background thread "ubi_bgt0d" started, PID 355
[ 754.256561] UBI: attached mtd3 to ubi1
[ 754.260406] UBI: MTD device name: "boot"
[ 754.265319] UBI: MTD device size: 10 MiB
[ 754.270233] UBI: number of good PEBs: 80
[ 754.274810] UBI: number of bad PEBs: 0
[ 754.279296] UBI: max. allowed volumes: 128
[ 754.283966] UBI: wear-leveling threshold: 4096
[ 754.288696] UBI: number of internal volumes: 1
[ 754.293182] UBI: number of user volumes: 1
[ 754.297668] UBI: available PEBs: 0
[ 754.302154] UBI: total number of reserved PEBs: 80
[ 754.306976] UBI: number of PEBs reserved for bad PEB handling: 2
[ 754.313049] UBI: max/mean erase counter: 7/4
[ 754.317352] UBI: image sequence number: 669794559
[ 754.322113] usbmon: debugfs is not available
[ 754.326782] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 754.332672] UBI: background thread "ubi_bgt1d" started, PID 358
[ 754.338958] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 754.346801] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 754.367523] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 754.375671] usb usb1: configuration #1 chosen from 1 choice
[ 754.381622] hub 1-0:1.0: USB hub found
[ 754.385498] hub 1-0:1.0: 3 ports detected
[ 754.493774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 754.500671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 754.507934] usb usb1: Product: OMAP-EHCI Host Controller
[ 754.513305] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd
[ 754.519561] usb usb1: SerialNumber: ehci-omap.0
[ 754.524414] Initializing USB Mass Storage driver...
[ 754.529571] usbcore: registered new interface driver usb-storage
[ 754.535675] USB Mass Storage support registered.
[ 754.540618] usbcore: registered new interface driver libusual
[ 754.546966] mice: PS/2 mouse device common for all mice
[ 754.571655] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 754.657592] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2
[ 754.721160] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3
[ 754.782379] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4
[ 754.845062] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 754.856170] bq27x00-battery 3-0055: support ver. 1.1.0 enabled
[ 754.862426] Bluetooth: HCI UART driver ver 2.2
[ 754.866912] Bluetooth: HCI H4 protocol initialized
[ 754.871795] Bluetooth: HCILL protocol initialized
[ 754.876617] hci_h4p hci_h4p: Registering HCI H4P device
[ 755.032531] mmci-omap mmci-omap.0: Failed to get debounce clock
[ 755.141082] mmci-omap mmci-omap.1: Failed to get debounce clock
[ 755.142120] mmci-omap mmci-omap.2: Failed to get debounce clock
[ 755.142974] Registered led device: pandora::sd1
[ 755.147857] Registered led device: pandora::sd2
[ 755.152770] Registered led device: pandora::bluetooth
[ 755.158203] Registered led device: pandora::wifi
[ 755.163574] Registered led device: pandora::keypad_bl
[ 755.169067] Registered led device: pandora::power
[ 755.174316] Registered led device: pandora::charger
[ 755.179779] usbcore: registered new interface driver usbhid
[ 755.185455] usbhid: v2.6:USB HID core driver
[ 755.190307] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 755.197143] ASoC version 0.13.2
[ 755.200592] OMAP3 Pandora SoC init
[ 755.204406] TWL4030 Audio Codec init
[ 755.209625] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 755.216583] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok
[ 755.230895] ALSA device list:
[ 755.233886] #0: omap3pandora (twl4030)
[ 755.238159] TCP cubic registered
[ 755.241424] NET: Registered protocol family 17
[ 755.245971] NET: Registered protocol family 15
[ 755.250518] Bluetooth: L2CAP ver 2.11
[ 755.254180] Bluetooth: L2CAP socket layer initialized
[ 755.259307] Bluetooth: SCO (Voice Link) ver 0.6
[ 755.263854] Bluetooth: SCO socket layer initialized
[ 755.268951] Bluetooth: RFCOMM socket layer initialized
[ 755.274200] Bluetooth: RFCOMM TTY layer initialized
[ 755.279113] Bluetooth: RFCOMM ver 1.10
[ 755.282958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 755.288299] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 755.294799] RPC: Registered udp transport module.
[ 755.299591] RPC: Registered tcp transport module.
[ 755.304382] ThumbEE CPU extension supported.
[ 755.308715] Disabling unused clock "sr2_fck"
[ 755.308715] Disabling unused clock "sr1_fck"
[ 755.308746] Disabling unused clock "mcbsp_fck"
[ 755.308746] Disabling unused clock "mcbsp_fck"
[ 755.308776] Disabling unused clock "mcbsp_fck"
[ 755.308776] Disabling unused clock "mcbsp_ick"
[ 755.308807] Disabling unused clock "mcbsp_ick"
[ 755.308807] Disabling unused clock "mcbsp_ick"
[ 755.308837] Disabling unused clock "gpt2_ick"
[ 755.308837] Disabling unused clock "gpt3_ick"
[ 755.308868] Disabling unused clock "gpt4_ick"
[ 755.308868] Disabling unused clock "gpt5_ick"
[ 755.308898] Disabling unused clock "gpt6_ick"
[ 755.308898] Disabling unused clock "gpt7_ick"
[ 755.308898] Disabling unused clock "gpt8_ick"
[ 755.308929] Disabling unused clock "gpt9_ick"
[ 755.308929] Disabling unused clock "wdt3_ick"
[ 755.308959] Disabling unused clock "wdt3_fck"
[ 755.308959] Disabling unused clock "gpio2_dbck"
[ 755.308990] Disabling unused clock "gpio3_dbck"
[ 755.308990] Disabling unused clock "gpio5_dbck"
[ 755.309020] Disabling unused clock "gpt9_fck"
[ 755.309020] Disabling unused clock "gpt8_fck"
[ 755.309051] Disabling unused clock "gpt7_fck"
[ 755.309051] Disabling unused clock "gpt6_fck"
[ 755.309051] Disabling unused clock "gpt5_fck"
[ 755.309082] Disabling unused clock "gpt4_fck"
[ 755.309082] Disabling unused clock "gpt3_fck"
[ 755.309112] Disabling unused clock "gpt2_fck"
[ 755.309112] Disabling unused clock "gpt1_ick"
[ 755.309143] Disabling unused clock "wdt1_ick"
[ 755.309143] Disabling unused clock "wdt2_ick"
[ 755.309173] Disabling unused clock "wdt2_fck"
[ 755.309173] Disabling unused clock "gpio1_dbck"
[ 755.309204] Disabling unused clock "gpt1_fck"
[ 755.309204] Disabling unused clock "cam_ick"
[ 755.309204] Disabling unused clock "cam_mclk"
[ 755.309234] Disabling unused clock "des1_ick"
[ 755.309234] Disabling unused clock "sha11_ick"
[ 755.309265] Disabling unused clock "rng_ick"
[ 755.309265] Disabling unused clock "aes1_ick"
[ 755.309295] Disabling unused clock "ssi_ick"
[ 755.309295] Disabling unused clock "mailboxes_ick"
[ 755.309295] Disabling unused clock "mcbsp_ick"
[ 755.309326] Disabling unused clock "mcbsp_ick"
[ 755.309326] Disabling unused clock "gpt10_ick"
[ 755.309356] Disabling unused clock "gpt11_ick"
[ 755.309356] Disabling unused clock "uart2_ick"
[ 755.309387] Disabling unused clock "i2c_ick"
[ 755.309387] Disabling unused clock "hdq_ick"
[ 755.309417] Disabling unused clock "mspro_ick"
[ 755.309417] Disabling unused clock "des2_ick"
[ 755.309417] Disabling unused clock "sha12_ick"
[ 755.309448] Disabling unused clock "aes2_ick"
[ 755.309448] Disabling unused clock "icr_ick"
[ 755.309478] Disabling unused clock "pka_ick"
[ 755.309478] Disabling unused clock "ssi_ssr_fck"
[ 755.309509] Disabling unused clock "hdq_fck"
[ 755.309509] Disabling unused clock "uart2_fck"
[ 755.309539] Disabling unused clock "mcbsp_fck"
[ 755.309539] Disabling unused clock "mcbsp_fck"
[ 755.309539] Disabling unused clock "i2c_fck"
[ 755.309570] Disabling unused clock "mspro_fck"
[ 755.309570] Disabling unused clock "gpt11_fck"
[ 755.309600] Disabling unused clock "gpt10_fck"
[ 755.309600] Disabling unused clock "iva2_ck"
[ 755.309631] Disabling unused clock "dpll4_m6x2_ck"
[ 755.309631] Disabling unused clock "dpll4_m5x2_ck"
[ 755.309661] Disabling unused clock "dpll3_m3x2_ck"
[ 755.309692] Disabling unused clock "sys_clkout1"
[ 755.309692] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 755.349548] Console: switching to colour frame buffer device 100x30
[ 755.533966] twl4030_rtc twl4030_rtc: setting system clock to 2011-02-01 16:23:56 UTC (1296577436)
[ 755.637634] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 755.643798] UBIFS: file system size: 504354816 bytes (492534 KiB, 480 MiB, 3909 LEBs)
[ 755.651855] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 755.659240] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 755.665130] UBIFS: default compressor: lzo
[ 755.669250] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 755.676025] VFS: Mounted root (ubifs filesystem).
[ 755.680938] Freeing init memory: 148K
[ 756.111297] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 756.119506] mmc0: new high speed SDHC card at address b368
[ 756.125762] mmcblk0: mmc0:b368 SD 15857664KiB
[ 756.130767] mmcblk0: p1
[ 756.390716] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 756.398956] mmc1: new SD card at address e624
[ 756.404052] mmcblk1: mmc1:e624 SU01G 992000KiB
[ 756.408935] mmcblk1: p1
[ 756.912719] udev: starting version 151
[ 757.888031] ads7846 spi1.0: touchscreen, irq 254
[ 757.893371] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 758.383941] mmci-omap mmci-omap.0: MMC IRQ 0x208002 : TC ERRI DCRC
[ 758.384338] mmcblk0: error -84 transferring data
[ 758.389007] end_request: I/O error, dev mmcblk0, sector 31715320
[ 758.395050] Buffer I/O error on device mmcblk0, logical block 3964415
[ 763.358886] NET: Registered protocol family 10
[ 763.443389] FAT: bogus number of reserved sectors
[ 763.448211] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 763.497924] FAT: bogus number of reserved sectors
[ 763.502746] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 763.837036] FAT: bogus number of reserved sectors
[ 763.841827] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 763.850799] FAT: bogus number of reserved sectors
[ 763.855682] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 764.565521] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 764.571502] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 764.578887] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 764.586181] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 764.592041] UBIFS: default compressor: lzo
[ 764.596191] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 765.461944] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 765.704132] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 810.315307] firmware: requesting brf6300.bin
[ 810.746917] hci_h4p hci_h4p: BT hci up and running.
[ 1043.969116] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1053.643890] hci_h4p hci_h4p: BT hci down.

Und wenn es per USB angeschlossen und im Speicher-Modus ist:
Gertrud:~$ dmesg
0rx, max 512
[ 751.869659] musb_hdrc: hw_ep 11tx, max 512
[ 751.869659] musb_hdrc: hw_ep 11rx, max 512
[ 751.869689] musb_hdrc: hw_ep 12tx, max 512
[ 751.869689] musb_hdrc: hw_ep 12rx, max 512
[ 751.869689] musb_hdrc: hw_ep 13tx, max 512
[ 751.869720] musb_hdrc: hw_ep 13rx, max 512
[ 751.869720] musb_hdrc: hw_ep 14shared, max 1024
[ 751.869750] musb_hdrc: hw_ep 15shared, max 1024
[ 751.869781] musb_hdrc: USB OTG mode controller at d80ab000 using PIO, IRQ 92
[ 751.891296] Bluetooth: Core ver 2.13
[ 751.891723] NET: Registered protocol family 31
[ 751.891723] Bluetooth: HCI device and connection manager initialized
[ 751.891754] Bluetooth: HCI socket layer initialized
[ 751.894836] NET: Registered protocol family 2
[ 751.898773] Switched to high resolution mode on CPU 0
[ 751.961456] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 751.962005] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 751.962249] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 751.962371] TCP: Hash tables configured (established 8192 bind 8192)
[ 751.962402] TCP reno registered
[ 751.984863] NET: Registered protocol family 1
[ 751.986206] NetWinder Floating Point Emulator V0.97 (double precision)
[ 751.988403] VFS: Disk quotas dquot_6.5.1
[ 751.988494] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 751.989044] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 751.991180] aufs 2-27
[ 751.991241] msgmni has been set to 485
[ 751.991302] io scheduler noop registered
[ 751.991333] io scheduler anticipatory registered (default)
[ 751.991333] io scheduler deadline registered
[ 751.991516] io scheduler cfq registered
[ 752.013427] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 752.036285] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 752.036346] console [ttyS0] enabled
[ 752.479339] brd: module loaded
[ 752.487152] loop: module loaded
[ 752.490356] pndctrl loaded.
[ 752.493774] usbcore: registered new interface driver asix
[ 752.499450] usbcore: registered new interface driver cdc_ether
[ 752.505584] usbcore: registered new interface driver rndis_host
[ 752.511627] i2c /dev entries driver
[ 752.517089] input: power-button as /devices/virtual/input/input0
[ 752.547363] triton2 power button driver initialized
[ 752.553924] Driver 'sd' needs updating - please use bus_type methods
[ 752.560852] omap2-nand driver initializing
[ 752.566131] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 752.575317] cmdlinepart partition parsing not available
[ 752.580627] Creating 5 MTD partitions on "omap2-nand":
[ 752.585784] 0x00000000-0x00080000 : "xloader"
[ 752.591033] 0x00080000-0x00260000 : "uboot"
[ 752.596557] 0x00260000-0x00280000 : "uboot-env"
[ 752.601684] 0x00280000-0x00c80000 : "boot"
[ 752.610534] 0x00c80000-0x20000000 : "rootfs"
[ 752.824462] UBI: attaching mtd4 to ubi0
[ 752.828399] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 752.834686] UBI: logical eraseblock size: 129024 bytes
[ 752.840148] UBI: smallest flash I/O unit: 2048
[ 752.844909] UBI: sub-page size: 512
[ 752.849548] UBI: VID header offset: 512 (aligned 512)
[ 752.855438] UBI: data offset: 2048
[ 754.109161] UBI: attached mtd4 to ubi0
[ 754.113037] UBI: MTD device name: "rootfs"
[ 754.118133] UBI: MTD device size: 499 MiB
[ 754.123138] UBI: number of good PEBs: 3963
[ 754.127899] UBI: number of bad PEBs: 33
[ 754.132446] UBI: max. allowed volumes: 128
[ 754.137115] UBI: wear-leveling threshold: 4096
[ 754.141876] UBI: number of internal volumes: 1
[ 754.146331] UBI: number of user volumes: 1
[ 754.150817] UBI: available PEBs: 0
[ 754.155303] UBI: total number of reserved PEBs: 3963
[ 754.160308] UBI: number of PEBs reserved for bad PEB handling: 39
[ 754.166473] UBI: max/mean erase counter: 32/4
[ 754.170837] UBI: image sequence number: 1167947814
[ 754.175720] UBI: attaching mtd3 to ubi1
[ 754.179565] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 754.185913] UBI: logical eraseblock size: 129024 bytes
[ 754.191375] UBI: smallest flash I/O unit: 2048
[ 754.196136] UBI: sub-page size: 512
[ 754.200775] UBI: VID header offset: 512 (aligned 512)
[ 754.206665] UBI: data offset: 2048
[ 754.213531] UBI: background thread "ubi_bgt0d" started, PID 355
[ 754.256561] UBI: attached mtd3 to ubi1
[ 754.260406] UBI: MTD device name: "boot"
[ 754.265319] UBI: MTD device size: 10 MiB
[ 754.270233] UBI: number of good PEBs: 80
[ 754.274810] UBI: number of bad PEBs: 0
[ 754.279296] UBI: max. allowed volumes: 128
[ 754.283966] UBI: wear-leveling threshold: 4096
[ 754.288696] UBI: number of internal volumes: 1
[ 754.293182] UBI: number of user volumes: 1
[ 754.297668] UBI: available PEBs: 0
[ 754.302154] UBI: total number of reserved PEBs: 80
[ 754.306976] UBI: number of PEBs reserved for bad PEB handling: 2
[ 754.313049] UBI: max/mean erase counter: 7/4
[ 754.317352] UBI: image sequence number: 669794559
[ 754.322113] usbmon: debugfs is not available
[ 754.326782] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 754.332672] UBI: background thread "ubi_bgt1d" started, PID 358
[ 754.338958] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 754.346801] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 754.367523] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 754.375671] usb usb1: configuration #1 chosen from 1 choice
[ 754.381622] hub 1-0:1.0: USB hub found
[ 754.385498] hub 1-0:1.0: 3 ports detected
[ 754.493774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 754.500671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 754.507934] usb usb1: Product: OMAP-EHCI Host Controller
[ 754.513305] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd
[ 754.519561] usb usb1: SerialNumber: ehci-omap.0
[ 754.524414] Initializing USB Mass Storage driver...
[ 754.529571] usbcore: registered new interface driver usb-storage
[ 754.535675] USB Mass Storage support registered.
[ 754.540618] usbcore: registered new interface driver libusual
[ 754.546966] mice: PS/2 mouse device common for all mice
[ 754.571655] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 754.657592] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2
[ 754.721160] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3
[ 754.782379] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4
[ 754.845062] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 754.856170] bq27x00-battery 3-0055: support ver. 1.1.0 enabled
[ 754.862426] Bluetooth: HCI UART driver ver 2.2
[ 754.866912] Bluetooth: HCI H4 protocol initialized
[ 754.871795] Bluetooth: HCILL protocol initialized
[ 754.876617] hci_h4p hci_h4p: Registering HCI H4P device
[ 755.032531] mmci-omap mmci-omap.0: Failed to get debounce clock
[ 755.141082] mmci-omap mmci-omap.1: Failed to get debounce clock
[ 755.142120] mmci-omap mmci-omap.2: Failed to get debounce clock
[ 755.142974] Registered led device: pandora::sd1
[ 755.147857] Registered led device: pandora::sd2
[ 755.152770] Registered led device: pandora::bluetooth
[ 755.158203] Registered led device: pandora::wifi
[ 755.163574] Registered led device: pandora::keypad_bl
[ 755.169067] Registered led device: pandora::power
[ 755.174316] Registered led device: pandora::charger
[ 755.179779] usbcore: registered new interface driver usbhid
[ 755.185455] usbhid: v2.6:USB HID core driver
[ 755.190307] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 755.197143] ASoC version 0.13.2
[ 755.200592] OMAP3 Pandora SoC init
[ 755.204406] TWL4030 Audio Codec init
[ 755.209625] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 755.216583] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok
[ 755.230895] ALSA device list:
[ 755.233886] #0: omap3pandora (twl4030)
[ 755.238159] TCP cubic registered
[ 755.241424] NET: Registered protocol family 17
[ 755.245971] NET: Registered protocol family 15
[ 755.250518] Bluetooth: L2CAP ver 2.11
[ 755.254180] Bluetooth: L2CAP socket layer initialized
[ 755.259307] Bluetooth: SCO (Voice Link) ver 0.6
[ 755.263854] Bluetooth: SCO socket layer initialized
[ 755.268951] Bluetooth: RFCOMM socket layer initialized
[ 755.274200] Bluetooth: RFCOMM TTY layer initialized
[ 755.279113] Bluetooth: RFCOMM ver 1.10
[ 755.282958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 755.288299] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 755.294799] RPC: Registered udp transport module.
[ 755.299591] RPC: Registered tcp transport module.
[ 755.304382] ThumbEE CPU extension supported.
[ 755.308715] Disabling unused clock "sr2_fck"
[ 755.308715] Disabling unused clock "sr1_fck"
[ 755.308746] Disabling unused clock "mcbsp_fck"
[ 755.308746] Disabling unused clock "mcbsp_fck"
[ 755.308776] Disabling unused clock "mcbsp_fck"
[ 755.308776] Disabling unused clock "mcbsp_ick"
[ 755.308807] Disabling unused clock "mcbsp_ick"
[ 755.308807] Disabling unused clock "mcbsp_ick"
[ 755.308837] Disabling unused clock "gpt2_ick"
[ 755.308837] Disabling unused clock "gpt3_ick"
[ 755.308868] Disabling unused clock "gpt4_ick"
[ 755.308868] Disabling unused clock "gpt5_ick"
[ 755.308898] Disabling unused clock "gpt6_ick"
[ 755.308898] Disabling unused clock "gpt7_ick"
[ 755.308898] Disabling unused clock "gpt8_ick"
[ 755.308929] Disabling unused clock "gpt9_ick"
[ 755.308929] Disabling unused clock "wdt3_ick"
[ 755.308959] Disabling unused clock "wdt3_fck"
[ 755.308959] Disabling unused clock "gpio2_dbck"
[ 755.308990] Disabling unused clock "gpio3_dbck"
[ 755.308990] Disabling unused clock "gpio5_dbck"
[ 755.309020] Disabling unused clock "gpt9_fck"
[ 755.309020] Disabling unused clock "gpt8_fck"
[ 755.309051] Disabling unused clock "gpt7_fck"
[ 755.309051] Disabling unused clock "gpt6_fck"
[ 755.309051] Disabling unused clock "gpt5_fck"
[ 755.309082] Disabling unused clock "gpt4_fck"
[ 755.309082] Disabling unused clock "gpt3_fck"
[ 755.309112] Disabling unused clock "gpt2_fck"
[ 755.309112] Disabling unused clock "gpt1_ick"
[ 755.309143] Disabling unused clock "wdt1_ick"
[ 755.309143] Disabling unused clock "wdt2_ick"
[ 755.309173] Disabling unused clock "wdt2_fck"
[ 755.309173] Disabling unused clock "gpio1_dbck"
[ 755.309204] Disabling unused clock "gpt1_fck"
[ 755.309204] Disabling unused clock "cam_ick"
[ 755.309204] Disabling unused clock "cam_mclk"
[ 755.309234] Disabling unused clock "des1_ick"
[ 755.309234] Disabling unused clock "sha11_ick"
[ 755.309265] Disabling unused clock "rng_ick"
[ 755.309265] Disabling unused clock "aes1_ick"
[ 755.309295] Disabling unused clock "ssi_ick"
[ 755.309295] Disabling unused clock "mailboxes_ick"
[ 755.309295] Disabling unused clock "mcbsp_ick"
[ 755.309326] Disabling unused clock "mcbsp_ick"
[ 755.309326] Disabling unused clock "gpt10_ick"
[ 755.309356] Disabling unused clock "gpt11_ick"
[ 755.309356] Disabling unused clock "uart2_ick"
[ 755.309387] Disabling unused clock "i2c_ick"
[ 755.309387] Disabling unused clock "hdq_ick"
[ 755.309417] Disabling unused clock "mspro_ick"
[ 755.309417] Disabling unused clock "des2_ick"
[ 755.309417] Disabling unused clock "sha12_ick"
[ 755.309448] Disabling unused clock "aes2_ick"
[ 755.309448] Disabling unused clock "icr_ick"
[ 755.309478] Disabling unused clock "pka_ick"
[ 755.309478] Disabling unused clock "ssi_ssr_fck"
[ 755.309509] Disabling unused clock "hdq_fck"
[ 755.309509] Disabling unused clock "uart2_fck"
[ 755.309539] Disabling unused clock "mcbsp_fck"
[ 755.309539] Disabling unused clock "mcbsp_fck"
[ 755.309539] Disabling unused clock "i2c_fck"
[ 755.309570] Disabling unused clock "mspro_fck"
[ 755.309570] Disabling unused clock "gpt11_fck"
[ 755.309600] Disabling unused clock "gpt10_fck"
[ 755.309600] Disabling unused clock "iva2_ck"
[ 755.309631] Disabling unused clock "dpll4_m6x2_ck"
[ 755.309631] Disabling unused clock "dpll4_m5x2_ck"
[ 755.309661] Disabling unused clock "dpll3_m3x2_ck"
[ 755.309692] Disabling unused clock "sys_clkout1"
[ 755.309692] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 755.349548] Console: switching to colour frame buffer device 100x30
[ 755.533966] twl4030_rtc twl4030_rtc: setting system clock to 2011-02-01 16:23:56 UTC (1296577436)
[ 755.637634] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 755.643798] UBIFS: file system size: 504354816 bytes (492534 KiB, 480 MiB, 3909 LEBs)
[ 755.651855] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 755.659240] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 755.665130] UBIFS: default compressor: lzo
[ 755.669250] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 755.676025] VFS: Mounted root (ubifs filesystem).
[ 755.680938] Freeing init memory: 148K
[ 756.111297] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 756.119506] mmc0: new high speed SDHC card at address b368
[ 756.125762] mmcblk0: mmc0:b368 SD 15857664KiB
[ 756.130767] mmcblk0: p1
[ 756.390716] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 756.398956] mmc1: new SD card at address e624
[ 756.404052] mmcblk1: mmc1:e624 SU01G 992000KiB
[ 756.408935] mmcblk1: p1
[ 756.912719] udev: starting version 151
[ 757.888031] ads7846 spi1.0: touchscreen, irq 254
[ 757.893371] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 758.383941] mmci-omap mmci-omap.0: MMC IRQ 0x208002 : TC ERRI DCRC
[ 758.384338] mmcblk0: error -84 transferring data
[ 758.389007] end_request: I/O error, dev mmcblk0, sector 31715320
[ 758.395050] Buffer I/O error on device mmcblk0, logical block 3964415
[ 763.358886] NET: Registered protocol family 10
[ 763.443389] FAT: bogus number of reserved sectors
[ 763.448211] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 763.497924] FAT: bogus number of reserved sectors
[ 763.502746] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 763.837036] FAT: bogus number of reserved sectors
[ 763.841827] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 763.850799] FAT: bogus number of reserved sectors
[ 763.855682] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 764.565521] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 764.571502] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 764.578887] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 764.586181] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 764.592041] UBIFS: default compressor: lzo
[ 764.596191] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 765.461944] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 765.704132] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 810.315307] firmware: requesting brf6300.bin
[ 810.746917] hci_h4p hci_h4p: BT hci up and running.
[ 1043.969116] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 1053.643890] hci_h4p hci_h4p: BT hci down.

Für die Erstellung eines Syslog brauch ich nähere Anweisungen, wie gesagt, Linux-Noob....^^
Den Befehl "syslog" im Terminal einzutippen, bringt nix.
 
Uh viele Infos sind da nicht auf den ersten Blick sticht auch das hier heraus.

  • [ 810.315307] firmware: requesting brf6300.bin
    [ 1043.969116] hub 1-0:1.0: unable to enumerate USB device on port 2

Hab leider noch keine Pandora daher kann ich dir nicht genau sagen welches Syslog benutzt wird.

Schau mal unter /var/log/ nach was es da so im Angebot gibt.
 
da gibts 4 Dateien:

lastlog (is leer)

slim.log
Inhalt:
/usr/bin/xauth: creating new authority file /var/run/slim.auth


slim: waiting for X server to begin accepting connections
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 x86_64
Current Operating System: Linux Gertrud 2.6.27.46-omap1 #1 Thu Aug 26 05:51:59 CEST 2010 armv7l
Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
Build Date: 26 June 2010 01:40:28PM

Current version of pixman: 0.17.12
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 1 17:29:04 2011
(==) Using config file: "/etc/X11/xorg.conf"
.
xf86TslibControlProc
xf86TslibControlProc
/usr/bin/xauth: creating new authority file /home/sebo/.Xauthority
stdin: is not a tty
pndnotifyd(1463): Operation not permitted
pndnotifyd: no process killed
/usr/bin/startxfce4: X server already running on display :0.0
_IceTransmkdir: ERROR: euid != 0,directory /tmp/.ICE-unix will not be created.
xfdesktop[1571]: starting up
Bluetooth: User has not enabled Bluetooth.

** (xfce4-session:1557): WARNING **: Unable to launch "/usr/libexec/xfce4/xfconf-migration/xfconf-migration-4.6.pl" (specified by autostart/xfconf-migration-4.6.desktop): Failed to execute child process "/usr/libexec/xfce4/xfconf-migration/xfconf-migration-4.6.pl" (No such file or directory)

wtmp (auch leer)

Xorg.0
Inhalt:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 x86_64
Current Operating System: Linux Gertrud 2.6.27.46-omap1 #1 Thu Aug 26 05:51:59 CEST 2010 armv7l
Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read console=ttyS0,115200n8 vram=6272K omapfb.vram=0:3000K
Build Date: 26 June 2010 01:40:28PM

Current version of pixman: 0.17.12
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 1 17:29:04 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "DefaultLayout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "OMAPFB"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/X11/misc
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x188bd8
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(WW) "glx" will not be loaded unless you've specified it to be loaded elsewhere.
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded even though the default is to disable it.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "omapfb"
(II) Loading /usr/lib/xorg/modules/drivers/omapfb_drv.so
(II) Module omapfb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 0.1.1
ABI class: X.Org Video Driver, version 6.0
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
omap1/2/3, S1D13745, HWA742
(WW) Falling back to old probe method for OMAPFB
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Running in FRAMEBUFFER Mode
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
(WW) Can't autodetect LCD controller, assuming internal
(II) LCD controller: internal
(II) omapfb(0): VideoRAM: 3000KiB (SDRAM)
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
(==) omapfb(0): RGB weight 565
(==) omapfb(0): Default visual is TrueColor
(--) omapfb(0): Virtual size is 800x480 (pitch 800)
(**) omapfb(0): Built-in mode "current"
(==) omapfb(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) omapfb(0): DPMS enabled
(II) omapfb(0): Video plane capabilities:
(II) omapfb(0): Video plane supports the following image formats:
(II) omapfb(0): XVideo extension initialized
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) config/hal: Adding input device gpio-keys
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 2.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) gpio-keys: always reports core events
(**) gpio-keys: Device: "/dev/input/event1"
(II) gpio-keys: Found 8 mouse buttons
(II) gpio-keys: Found keys
(II) gpio-keys: Configuring as mouse
(II) gpio-keys: Configuring as keyboard
(**) gpio-keys: YAxisMapping: buttons 4 and 5
(**) gpio-keys: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device power-button
(**) power-button: always reports core events
(**) power-button: Device: "/dev/input/event0"
(II) power-button: Found keys
(II) power-button: Configuring as keyboard
(II) XINPUT: Adding extended input device "power-button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device touchscreen
(II) LoadModule: "tslib"
(II) Loading /usr/lib/xorg/modules/input/tslib_drv.so
(II) Module tslib: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 0.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) touchscreen: always reports core events
(II) XINPUT: Adding extended input device "touchscreen" (type: TOUCHSCREEN)
xf86TslibControlProc
xf86TslibControlProc
(II) config/hal: Adding input device nub1
(**) nub1: always reports core events
(**) nub1: Device: "/dev/input/event4"
(II) nub1: Found 3 mouse buttons
(II) nub1: Found scroll wheel(s)
(II) nub1: Found relative axes
(II) nub1: Found x and y relative axes
(II) nub1: Configuring as mouse
(**) nub1: YAxisMapping: buttons 4 and 5
(**) nub1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "nub1" (type: MOUSE)
(**) nub1: (accel) keeping acceleration scheme 1
(**) nub1: (accel) acceleration profile 0
(II) nub1: initialized for relative axes.
(II) config/hal: Adding input device nub0
(**) nub0: always reports core events
(**) nub0: Device: "/dev/input/event3"
(II) nub0: Found 3 mouse buttons
(II) nub0: Found scroll wheel(s)
(II) nub0: Found relative axes
(II) nub0: Found x and y relative axes
(II) nub0: Configuring as mouse
(**) nub0: YAxisMapping: buttons 4 and 5
(**) nub0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "nub0" (type: MOUSE)
(**) nub0: (accel) keeping acceleration scheme 1
(**) nub0: (accel) acceleration profile 0
(II) nub0: initialized for relative axes.
(II) config/hal: Adding input device keypad
(**) keypad: always reports core events
(**) keypad: Device: "/dev/input/event2"
(II) keypad: Found keys
(II) keypad: Configuring as keyboard
(II) XINPUT: Adding extended input device "keypad" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
 
Back
Top