Case: Difference between revisions - Pyra Wiki

No edit summary
m (Set the include part)
Line 1: Line 1:
<onlyinclude>
* Dimensions 140 x 84 x 29 mm
* Dimensions 140 x 84 x 29 mm
* Polycarbonate (PC) plastic ([https://youtu.be/q0X97nV2yaM?t=21 very strong])
* Polycarbonate (PC) plastic ([https://youtu.be/q0X97nV2yaM?t=21 very strong])
* Molds are made for PC, so PC pellets are needed.
* Molds are made for PC, so PC pellets are needed.
* Color will be mixed into the plastic itself, not painted on
* Color will be mixed into the plastic itself, not painted on
* Colors yet to be determined
* Colors yet to be determined</onlyinclude>
== Colors ==
== Colors ==
Prototype Colors [https://pyra-handheld.com/boards/threads/a-few-colors-and-packages-with-a-poll.77548/ ], Final Colors not yet decided. One will be definitely Black [https://pyra-handheld.com/boards/threads/cases-colors-and-emails.77466/#post-1379795] 2nd Color to be Chosen. All [https://www.ralcolorchart.com/ RAL Classic] Colors should be easily available[https://pyra-handheld.com/boards/threads/tweaking-and-finalizing.77624/#post-1384674].
Prototype Colors [https://pyra-handheld.com/boards/threads/a-few-colors-and-packages-with-a-poll.77548/ ], Final Colors not yet decided. One will be definitely Black [https://pyra-handheld.com/boards/threads/cases-colors-and-emails.77466/#post-1379795] 2nd Color to be Chosen. All [https://www.ralcolorchart.com/ RAL Classic] Colors should be easily available[https://pyra-handheld.com/boards/threads/tweaking-and-finalizing.77624/#post-1384674].

Revision as of 08:28, 8 August 2017

  • Dimensions 140 x 84 x 29 mm
  • Polycarbonate (PC) plastic (very strong)
  • Molds are made for PC, so PC pellets are needed.
  • Color will be mixed into the plastic itself, not painted on
  • Colors yet to be determined

Colors

Prototype Colors [1], Final Colors not yet decided. One will be definitely Black [2] 2nd Color to be Chosen. All RAL Classic Colors should be easily available[3].

Blender file

  • The Blender file of the case can be used to make mods or renders of the real thing.


Injection Molded Plastic

  • The default injection molded case is produced by Form Action in Greece.
  • Based on the Pandora case with fixes to, among other things, battery compartment width.

Development cases

  • Early Cases where 3D Printed.
  • First (Injection Molded Plastic) prototype Cases needed a lot of Fixes (such as Fixing the Gap at the Front).
Back
Top