Mainboard: Difference between revisions - Pyra Wiki

No edit summary
Line 1: Line 1:
This is the largest PCB in the Pyra, with a wide range of different functions. It could be compared to the motherboard in a traditional desktop computer, with the addition of a keyboard and gaming controls on one side. Display-support hardware (the [[Displayboard]]) and the processor itself (see [[CPU-Board]]) are each on separate PCBs.
This is the largest PCB in the Pyra, with a wide range of different functions. It could be compared to the motherboard in a traditional desktop computer, with the addition of a keyboard and gaming controls on one side. Display-support hardware (the [[Displayboard]]) and the processor itself (see [[CPU-Board]]) are each on separate PCBs.


The Mainboard includes the following hardware.
The Mainboard includes the following hardware:


==[[Modem]]==
==[[Modem]]==
There is a space for an optional [[Modem|WWAN&GPS]] module. This may be populated with various pin-compatible chips designed for different regions, or not at all, depending on which Pyra model you buy.
There is a space for an optional [[Modem|WWAN&GPS]] module. This will be populated with various Pin-compatible Modules designed for different Regions, or not at all, depending on which Pyra Model you buy.


[[image:Pyra_PCB_baredev.jpg|thumb|Unpopulated development version]]
[[image:Pyra_PCB_baredev.jpg|thumb|Unpopulated development version]]
Line 11: Line 11:


==Rumble==
==Rumble==
Haptic feedback is provided through vibration generated by an electric motor with an unbalanced mass on its driveshaft.  
Haptic feedback is provided through vibration generated by an electric Motor with an unbalanced mass on its Driveshaft.  
[http://boards.openpandora.org/uploads/post-1-0-32618500-1406479444.jpeg]
[http://boards.openpandora.org/uploads/post-1-0-32618500-1406479444.jpeg]


Line 21: Line 21:
==Connectivity==
==Connectivity==


The Pyra connects to [[WiFi]] and [[Bluetooth]] from modules on the Mainboard.
The Pyra connects to [[Modem|WWAN&GPS]], [[WiFi]] and [[Bluetooth]] from Modules on the Mainboard.

Revision as of 19:21, 22 October 2016

This is the largest PCB in the Pyra, with a wide range of different functions. It could be compared to the motherboard in a traditional desktop computer, with the addition of a keyboard and gaming controls on one side. Display-support hardware (the Displayboard) and the processor itself (see CPU-Board) are each on separate PCBs.

The Mainboard includes the following hardware:

Modem

There is a space for an optional WWAN&GPS module. This will be populated with various Pin-compatible Modules designed for different Regions, or not at all, depending on which Pyra Model you buy.

Unpopulated development version
Populated early version keyboardside
Populated early version componentside

Rumble

Haptic feedback is provided through vibration generated by an electric Motor with an unbalanced mass on its Driveshaft. [1]

Storage

Main Article: Storage

The Mainboard includes a combination microSD/SIM card slot which, with the addition of a microSD card, can be used for internal storage up to 200GB. With the addition of two accessible regular-sized SD card slots (each capable of up to 512GB storage), that's 1.2 TB of removable storage.

Connectivity

The Pyra connects to WWAN&GPS, WiFi and Bluetooth from Modules on the Mainboard.

Back
Top