Peripherals: Difference between revisions - Pyra Wiki

m (Binky moved page Peripherials to Pyra Wiki:Peripherals: Corrected Typo)
m (→‎eSata adaptor: The superspeed lines aren't unused; they carry SATA signals!)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The Pyra will support USB peripherals to a similar extent to a Linux desktop PC.
Roughly speaking, this means that:
* USB memory devices, many network adaptors, keyboards and mice should all work flawlessly out of the box
* Other devices (such as audiovisual equipment) have a good chance of working, especially if they are a popular brand and more than a year (or so) old. Check before you buy.
* Devices produced by hacker/maker friendly organisations have a very high chance of working, but you may have to beg a member of the community to port the software to ARMhf (or do it yourself!)
* Devices for which the only drivers available are closed-source ones provided by the manufacturer have a very poor chance of working, ''even if the manufacturer offers drivers for x86(_64) Linux systems''
==eSata adaptor==
==eSata adaptor==
[[Image:ESATA-adaptor.jpg]]
*The USB 3.0 Port provides USB 2.0 and eSATA via the superspeed Connectors. An Adaptor converts this to an real (e)SATA Port
[[Image:ESATA-adaptor.jpg|400px]]
*Plugs in to allow connection of eSATA drives to your pyra.
*Plugs in to allow connection of eSATA drives to your pyra.
*Uses native SATA hardware in the Pyra's SoC, allowing greater datarates than a SATA-to-USB adaptor.
*Uses native SATA hardware in the Pyra's SoC, allowing greater datarates than a SATA-to-USB adaptor.

Latest revision as of 18:30, 1 April 2021

The Pyra will support USB peripherals to a similar extent to a Linux desktop PC. Roughly speaking, this means that:

  • USB memory devices, many network adaptors, keyboards and mice should all work flawlessly out of the box
  • Other devices (such as audiovisual equipment) have a good chance of working, especially if they are a popular brand and more than a year (or so) old. Check before you buy.
  • Devices produced by hacker/maker friendly organisations have a very high chance of working, but you may have to beg a member of the community to port the software to ARMhf (or do it yourself!)
  • Devices for which the only drivers available are closed-source ones provided by the manufacturer have a very poor chance of working, even if the manufacturer offers drivers for x86(_64) Linux systems

eSata adaptor

  • The USB 3.0 Port provides USB 2.0 and eSATA via the superspeed Connectors. An Adaptor converts this to an real (e)SATA Port

  • Plugs in to allow connection of eSATA drives to your pyra.
  • Uses native SATA hardware in the Pyra's SoC, allowing greater datarates than a SATA-to-USB adaptor.
Back
Top