Cramfs Help


put the .img file on the SD card. Boot the gp2x with the SD in. You should see a firmware updating screen. If you don't see the screen, try formatting the SD with windows to FAT32 and copy the .img to the empty SD and try again.
 
You may need to use a different SD card. One of my cards won't flash the GP2x even in FAT32, but the other does. Try other cards if you still have problems, even a tiny 8MB card would do.
 
carlgeorge posted on Mar 1 2006 at 11:35 AM said:
You may need to use a different SD card. One of my cards won't flash the GP2x even in FAT32, but the other does. Try other cards if you still have problems, even a tiny 8MB card would do.
I was under the impression that any card under 64Mb would not flash properly?
 
Last edited by a moderator:
Back
Top