We are pleased to announce that CAANOO firmware 1.6.1 version has just been released.
 
 
◆. Update information ◆.
- Improvement in the internal boot sequence
- Boot Logo change
◆. How to upgrade the firmware to 1.6.1 ver. ◆.
* Upgrade the firmware from 1.5.0 version to 1.6.1 version
1. Download the firmware from [customer center-download-firmware]
2. Decompress the downloaded file, copy and paste it into the roots folder of the SD card.
3. Insert the SD card to your device and boot it while pressing the R button
4. Once “Firmware upgrading…” message appears, release the R button.
5. If “Firmware Upgrade Complete” message pops up, upgrade is complete.
 
 
* Upgrade the firmware from 1.0.1 version to 1.6.1 version
1. Download the firmware from [customer center-download-firmware]
2. Decompress the downloaded file, copy and paste it into the roots folder of SD card
3. Insert SD card to your device and boot it while pressing the R button.
4. When “Firmware upgrading…” message appears, release the R button.
5. Once “Bootloader was updated” message appears, repeat step #3-#4.
6. If “Firmware Upgrade Complete” message turns up on the screen, upgrade is complete.
 
**Please note that we are not liable for any problem arising from carelessness or misuse by users during the firmware upgrade
		 
	
					
					
	
		
	
					
					
					◆. Update information ◆.
- Improvement in the internal boot sequence
- Boot Logo change
◆. How to upgrade the firmware to 1.6.1 ver. ◆.
* Upgrade the firmware from 1.5.0 version to 1.6.1 version
1. Download the firmware from [customer center-download-firmware]
2. Decompress the downloaded file, copy and paste it into the roots folder of the SD card.
3. Insert the SD card to your device and boot it while pressing the R button
4. Once “Firmware upgrading…” message appears, release the R button.
5. If “Firmware Upgrade Complete” message pops up, upgrade is complete.
* Upgrade the firmware from 1.0.1 version to 1.6.1 version
1. Download the firmware from [customer center-download-firmware]
2. Decompress the downloaded file, copy and paste it into the roots folder of SD card
3. Insert SD card to your device and boot it while pressing the R button.
4. When “Firmware upgrading…” message appears, release the R button.
5. Once “Bootloader was updated” message appears, repeat step #3-#4.
6. If “Firmware Upgrade Complete” message turns up on the screen, upgrade is complete.
**Please note that we are not liable for any problem arising from carelessness or misuse by users during the firmware upgrade
 
	 
	