[21] Mehrere PCBs


Terran

Active Member
Joined
Oct 30, 2009
Messages
527
Age
32
EvilDragon [Englischer Beitrag] said:
This is just a quick update about how things are proceeding.

It's basically a Nikolaus-only update, as not much else has happened in other areas, except that I got the first samples of 720p LCDs, but I need to wait for the display PCBs before I can test them :)
A different 720p model should arrive in about 1,5 weeks as well, and Nikolaus designed the Display PCB with both connectors, so we can use one PCB to test both.

1. The Display PCB

The PCB to test these LCDs is basically finished.
We will probably produce them within the next two weeks.


2. The SoC Board

If you followed my posts, you'll know that the first SoC Board will NOT have the SoC installed yet, but a plug where it can be connected with the OMAP5 Devboard.

However, there's basically everything except the OMAP5 already included, so once that's done, almost everything is finished. Well, almost sounds easy, but wiring up the OMAP will still be a lot of work, so that'll take a while.

The SoC board (without the OMAP) is also pretty much finished already. As usual, the last bits take longer than the rest. :)


That's some nice progress going on there, hope to have some case news ready next week :)


Übersetzung said:
Das ist nur ein schnelles Update, wie es momentan so läuft.

Dies ist eigentlich nur ein Update von Nikolaus, da nicht viel geschehen ist, außer, dass ich den ersten 720p LCD bekommen habe, aber ich muss auf das Display PCB warten, um testen zu können :).
Ein anderes 720p Display sollte in eineinhalb Wochen ankommen und Nikolaus hat das PCB mit beiden Anschlüssen versehen, damit wir beide Displays testen können.


1.) Das Display PCB

Das PCB um die LCDs zu testen ist komplett.
Wir werden es in den nächsten 2 Wochen herstellen.


2.) Das SoC PCB

Wenn ihr meinen Posts folgt, wisst ihr, dass das erste SoC Board NICHT den SoC enthalten wird, aber einen Anschluss um mit dem OMAP5 Devboard zu verbinden.

Wie auch immer, es ist eigentlich alles vorhanden, außer dem OMAP5 - wenn alles also erledigt ist, ist es fast fertig.
Kling einfach, aber den OMAP zu verdrahten wird noch viel arbeit und Zeit benötigen.

Das SoC Board (ohne OMAP) ist also so gut wie fertig. Wie immer, benötigt das letzte Stück, die meiste Zeit :).


Das ist ein schöner Fortschritt, ich hoffe ich habe neue News zum Gehäuse nächste Woche :).



Blog
Quelle
 
Back
Top