Linux-SWAT
Forum Addict!
- Joined
 - Feb 13, 2010
 
- Messages
 - 9,284
 
How are defined the default parameters (well the card boots) if no bootfile is present ?
In the .dtb ?
				
			In the .dtb ?
[     *] A start job is running for Pyra First Run Wizard (7min 14s / no limit)
	[  OK  ] Started Network Manager.
Manager.
[   15.932586] wlcore: ERROR could not get firmware ti-connectivity/wl127x-fw-5-sr.bin: -2
[  OK  ] Started LSB: exim Mail Transport Agent.
[   16.357208] wlcore: ERROR couity/wl127x-fw-5-sr.bin: -2
ld not get firmware ti-connectivity/wl127x-fw-5-sr.bin: -2
[   16.769897] wlcore: ERROR firmware boot failed despite 3 retries
[   18.600738] smsc75xx 1-2.3:1.duplex, lpa 0xCDE1
         Starting Network Manage[  OK  ] Started Network Manager Script Dispatcher Service.
[  *** ] (1 of 2) A start job is running for dev-ttyO2.device
	Generally by default the root account is disabled on ssh login... it's something that can be changed in the sshd config file.root/root didn't work with ssh.
I'll check that.
root@darkstar:~# fdisk -l /dev/mmcblk1
Disk /dev/mmcblk1: 7.3 GiB, 7818182656 bytes, 15269888 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@darkstar:~# fdisk -l /dev/mmcblk1boot0
Disk /dev/mmcblk1boot0: 2 MiB, 2097152 bytes, 4096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@darkstar:~# fdisk -l /dev/mmcblk1boot1
Disk /dev/mmcblk1boot1: 2 MiB, 2097152 bytes, 4096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
	Great !ignore the boot0 and boot1 partitions, the rest just behaves like a normal sd card, just one you can't remove.
	