Psu For Gp32


johnnyskullhead

Still Fresh
hi
i want to use a psu for my machine but
lost my gp32 instructions
anyone know polarity settings or if there be a virtual manual anywhere ?? :blink:
 
It has to provide 3 volts and at least 300 milliamps with a negative polarity plug. You really can't get any more simple than that so you'll have to look for something that satisfies those requirements.
 
Just go to the nearest shop with power adaptors and repeat it to the clerk. Should understand.
 
Uh, isn't that information on the unit? mine has a polarity diagram next to the plug, and it says the 3volts 300ma on the back
 
Just make sure you stick to NO MORE than 3 VOLTS and , AND , MOST IMPORTANT , that the centre of the jack plug is SET TO NEGATIVE.
Positive to the OUTSIDE of the jack and NEGATIVE to the middle INSIDE post / pole..
Get it wrong and save for a new BLU...
Davey Fontan...
Original Mystical Ninja... :ph34r:
 
Back
Top