New proud owner of 1GHz pandora here,
I've read the hacker's manual, thank you MWeston, and the team, you guys rawk! (am also working my way through TI's spruf98x.pdf, but it's slow going).
Do any of the hardware gurus know why U32 is unpopulated on rev6D board? What chip was going to be used, and I'm curious as to the function of int1 and int2 test pads leading from this footprint.
Is the RTC internal to the twl4030 (dmesg registered twl_rtc as rtc0)? There were also a mention on the board (http://boards.openpandora.org/topic/9899-time-and-date-drifting/#entry246349) that there is possibly a meaty cap that retains enough energy to keep the settings when changing batteries. My question is this, could one connect a small rechargeable battery to the cap like with a "normal RTC"? If so, where is the capacitor located. (a hint perhaps Mr MW?) I know that this is most likely not practical, but I am curious and would like to know these sort of things.
On the software side of things: how does one check what graphics drivers are installed? Currently running Zaxxon 1.60RC on an 64GB sdxc and have done sudo opkg update and opkg upgrade.
Have read http://boards.openpandora.org/index.php/topic/12233-sgx-driver-installer-beta/ and http://pandorawiki.org/SGX_drivers as well as http://pandoralive.info/?p=2303 but could not find hints to check what version is installed.
cat /proc/pvr/version prints version 1.4.14.2514 (release), System Version String: SGX revision - 1.2.5
dmesg | grep sgx prints "OMAP3630 ES1.2 (l2cache iva neon isp 192mhz_clk)" and dmesg | grep SGX prints "SGX clock rate 200MHz".
Then opkg list ti-* lists amongst a heap of other things ti-codecs-omap3530-dev_4_00_00_00-r28a.5_omap3-pandora.ipk. Does this have anything to do with the driver version? I looked on the TI website but am now quite confused.
Any hints or RTFM (possibly with a link or info where to find the TFM to R it) would be most helpful and rooooooolly rooooooolly appreciated!
Regards
Crawford
I've read the hacker's manual, thank you MWeston, and the team, you guys rawk! (am also working my way through TI's spruf98x.pdf, but it's slow going).
Do any of the hardware gurus know why U32 is unpopulated on rev6D board? What chip was going to be used, and I'm curious as to the function of int1 and int2 test pads leading from this footprint.
Is the RTC internal to the twl4030 (dmesg registered twl_rtc as rtc0)? There were also a mention on the board (http://boards.openpandora.org/topic/9899-time-and-date-drifting/#entry246349) that there is possibly a meaty cap that retains enough energy to keep the settings when changing batteries. My question is this, could one connect a small rechargeable battery to the cap like with a "normal RTC"? If so, where is the capacitor located. (a hint perhaps Mr MW?) I know that this is most likely not practical, but I am curious and would like to know these sort of things.
On the software side of things: how does one check what graphics drivers are installed? Currently running Zaxxon 1.60RC on an 64GB sdxc and have done sudo opkg update and opkg upgrade.
Have read http://boards.openpandora.org/index.php/topic/12233-sgx-driver-installer-beta/ and http://pandorawiki.org/SGX_drivers as well as http://pandoralive.info/?p=2303 but could not find hints to check what version is installed.
cat /proc/pvr/version prints version 1.4.14.2514 (release), System Version String: SGX revision - 1.2.5
dmesg | grep sgx prints "OMAP3630 ES1.2 (l2cache iva neon isp 192mhz_clk)" and dmesg | grep SGX prints "SGX clock rate 200MHz".
Then opkg list ti-* lists amongst a heap of other things ti-codecs-omap3530-dev_4_00_00_00-r28a.5_omap3-pandora.ipk. Does this have anything to do with the driver version? I looked on the TI website but am now quite confused.
Any hints or RTFM (possibly with a link or info where to find the TFM to R it) would be most helpful and rooooooolly rooooooolly appreciated!
Regards
Crawford
Last edited by a moderator: