Gp32 Newbie Website


Splinter

Member
Joined
Jan 19, 2004
Messages
230
Age
32
Location
Donny, England (follow signs that say craphole)
Website
gp32place.150m.com
How about creating a downloadable file (i.e HLP or PDF) which could then be added to this forum. It could contain loads of screenshots and such. May be easier to maintain a file rather than webpages. Just an idea. Either way would be cool though.

How about after finishing the webby make a downloadable offline version. Wouldnt be much trouble, just nicely organise all the pages and images and you'd be set :D
 

Horscht

Banned?
Joined
Jan 5, 2004
Messages
1,612
Age
35
Location
Germany
Website
Visit site
hehe, I wrote a storag FAQ:

Code:
Q: What storage does the GP32 support?
A: The GP32 uses Smart Media Carts (SMCs) as their storage. They are available in 8,16,32,64 and 128 Megabyte

Q: Dude, WTF are you talking about? I just found this [insert.size.above.128] Megabyte SMC on the Internet.
   I could use those.
A: well, first of all, congratulations. You found one of those rare SMCs.But, no you could not.
   The 128 Megabyte Limit is Hardcoded into the GP32 and cannot be removed.

Q: But there are [insert.size.above.128] Megabyte SD-cards/MMC-cards/etc. available. Couldn't I just buy those and use an
   SMC Adapter to use those cards?
A: Well, technically, you could. However, as already said before, the limit is hardcoded into the GP32. 
   SMC Adaptors are reported to be working, however, the GP32 will only be able to use the first 128 Megabytes on that card.
   There is no way to get the GP32 to recognize the rest of the card. So the Adaptor solution is only a real solution if you
   spare SD/MMC/etc. cards lying around somewhere, and don't mind using a, say, 512MB card with a usable space of 128.

Q: But couldn't I........
A: No, you couldn't

Q: Allright, allright, I got it. But I have this USB stick/harddrive lying around. Couldn't I just hoock that up to the USB
   port of my GP32?
A: Well, you could hook it up, yes. But the GP32 won't be able to access it. At the moment there is no way to use USB storage
   but GPlinux is already able to recognize USB storage, but it doesn't have write access to USB or SMC, so the only thing
   you can do is looking at the files that you have on your storage.

Q: Ok, how would I hook the USB Stick/HDD up, then? And how would I use GPlinux
A: 1. Don't bother with it! It's not worth the hassle.
   2. If you want to fiddle around anyway, try reading in the GPlinux Forum, the usage of GPlinux will not be covered in 
      this FAQ.

Q: Do you like beer?
A: Yes, indeed I do. If you have some in spare, send it to 635 Fakestreet in 778443 Faketown. Thank you!
 

josafisch

Still Fresh
Joined
Mar 28, 2005
Messages
24
Age
39
Location
The 90% of your brain you DONT use...
Website
Visit site
Excellent idea.. helps prevent us newbies from getting flamed when they ask a fairly simple question but don't know where to look for the answer. GP32Start or something like that would make a nice url... I had problems finding one area that had all the info I needed when I was researching buying a GP... GBAx.com (where i bought it) would probably be interested in helping with such a task.
 

shinneri

Certified Guru
Joined
Sep 10, 2004
Messages
2,393
Age
33
Location
Middle of Nowhere, USA
Website
www.gpnewbie.com
It would be kind of nice if it were a part of this site. I don't know whether Hando can have subdomains or not, but newbie.gp32x.de would be nice.

And then it could be integrated easier into GP32x, so it would be very easy to find for GP32 newcomers.
 
Last edited by a moderator:

johncross85

Startled By Midgets
Joined
Nov 3, 2003
Messages
341
Location
Newton, UK
Website
Visit site
Thanks for all your good words folks - much appreciated! I'm hoping to have the basic FAQ titles inserted by this afternoon (with Lorem Ipsum answers) so you'll be able to tell me if I'm missing anything out;) I'll then start writing all the content - probably ripping a lot of it from posts on here (though I'll ask permission first).

If anyone wants to contribute please feel free to PM me or email me on john[at]cypherspace.co.uk. Any contribution is very much appreciated but links to threads with 'definative' answers (like the one alyinsanfran gave above) would be very useful.

Thanks again,

J(ohn)
 

johncross85

Startled By Midgets
Joined
Nov 3, 2003
Messages
341
Location
Newton, UK
Website
Visit site
Splinter posted on Mar 31 2005 at 09:21 PM said:
How about creating a downloadable file (i.e HLP or PDF) which could then be added to this forum. It could contain loads of screenshots and such. May be easier to maintain a file rather than webpages. Just an idea. Either way would be cool though.

How about after finishing the webby make a downloadable offline version. Wouldnt be much trouble, just nicely organise all the pages and images and you'd be set :D


If there's enough interest I certainly will. A nice zip of all the files would work quite well or I could PDF it all up - just a case of dragging HTML files into Acrobat.

J(ohn)
 
Last edited by a moderator:

Moogle

.
Joined
Apr 27, 2004
Messages
283
Age
36
Location
Netherlands
Website
Visit site
Very nice idea, if help is needed ask, I'm sure many will offer support :) That said, I'm sure you thought about a Wiki setup, what made you decide not to go that way?
 

johncross85

Startled By Midgets
Joined
Nov 3, 2003
Messages
341
Location
Newton, UK
Website
Visit site
Moogle posted on Apr 1 2005 at 11:51 AM said:
Very nice idea, if help is needed ask, I'm sure many will offer support :) That said, I'm sure you thought about a Wiki setup, what made you decide not to go that way?



Mainly because I didn't think of a Wiki setup :p

Now that I have I'm not sure... Although I have quite a lot of time to dedicate to this right now I probably won't have in a couple of months. With a Wiki setup I'd have to keep a constant eye on it for nobends publishing dodgy stuff and I doubt I'd have the time. That said, maybe I'll go that way when I have all the content together - never say never!


I've just uploaded a revised version with loads of Lorem Ipsum in. However, I have typed up one topic: "What are the different versions of the GP32?"

You'll see the kind of structure I was thinking of - basically a brief answer and then detail. What do we think? Suggestions/improvements?

Thanks to everyone that's volunteered to help. I hope to get cracking with the main body of the text next week so I may well call on you all then :D

Thanks again,

J(ohn)
 
Last edited by a moderator:

Moogle

.
Joined
Apr 27, 2004
Messages
283
Age
36
Location
Netherlands
Website
Visit site
Looks very good, though I'm not so sure about the current colour combination :) Some more contrast would be welcome, especially in lists as the emulator list, where the difference between rows is hardly seeable.

Good work!
 

Bingo Jesus

GP2X Hardcore
Joined
Jun 25, 2004
Messages
384
Age
34
Location
Cumbria, UK
I started on a new FAQ, but work has gotten on top of me, so I'll just post here what I had already written. Some of it was lifted from the old FAQ.

NLU, FLU, BLU+?
Currently there have been three main versions of the GP32. The original, and unlit unit (NLU) were the first produced by Gamepark, as you can guess by the unlit model name it had no lighting like the Gameboy colour.

The next model was the front-lit unit (FLU), these are exactly the same as the NLUs except that they were modded by another company to give them front lighting, this means that they are exactly the same internally (They are also meant to be the best at over clocking, craigix reports that many models went over 200Mhz.) The lighting puts a drain on battery life reducing it to around 4-6 hours.

Next came the backlit unit (BLU), these came out the same time as Gamepark were promoting the GP32 in Europe. They have been reported by users who own all three unit to have the nicest lighting and to have the hardest screen to see in natural light. Later a new batch of BLUs seemed to be faulty, not displaying graphics properly. These were actually not faulty, they just used a new Taiwanese LCD instead of the old Samsung one, these models have been unofficially christened the BLU+ by members of the GP32x boards. Most software has now been fixed to work on the BLU+ including DRMD and GPDoom. The other problem with BLU+ is the poor over-clocking ability that they display, but if you want to get 166Mhz it may be worth getting a 166Mhz unit from GBAX.

Lit or Unlit?
This really is a question of how much you are going to use the GP32 and when. NLUs can be picked up quite cheaply and often over clock quite highly, the screen reflects light well so there should be no problems, if you are mostly going to us either GP32 casually in places with good lighting it might be worth trying to pick up an NLU from Liksang or Ebay (Note. you can’t fix a GBA style afterburner kit to a NLU, due to the afterburner membrane being to small for the GP32’s screen.) If you are mostly going to use it at night or in a car it might be worth trying to pick up a FLU or BLU, these do cost more but are very impressive. In the case of the BLU it’s worth noting that it very hard to see the screen when the light isn’t on, even in well lit conditions and also that you might get a BLU+ (although in all honesty there very little that isn’t working now.)

Battery life
NLU 8-12 hours,
FLU when lit 4-6 hours,
BLU when lit 4-6 hours,
BLU+ when lit 4-6 hours

As always if the GP32 these are just estimates, if you are overclocking the unit you can expect reduced battery lives.

Specifications
Size 147mm x 88mm x 34mm
Weight 163g
LCD 65,536 Colours, 320x240 size screen, 3.5 inch reflective liquid crystal TFT
CPU 32-bit RISC
RAM 8mb
ROM 512kb

What you need
A GP32 obviously, a USB cable of GP32 (This should come with the GP32, but if buying off Ebay it’s always worth checking), a Smart Media Card (SMC) to store games and a couple of batteries.

Rechargeable batteries are always nice, especially considering how quickly the lit units eat though batteries, but it’s not essential. A USB SMC reader is always nice, as the GP32 does write slowly to the SMC.

The SMC
The GP32 can only accept 3.3V SMCs of a capacity of up to 128mb. This is because the GP32 can’t read anything after the 128th mb, it’s a hardware limitation which is unlikely to ever be rectified. Apparently people have had success with XD to SMC adapters, but still only use 3.3v XD cards of a capacity of up to 128mb.

Buying the unit
In the UK it makes most sense to buy from cragix’s shop GBAX, if you want a BLU+, or Ebay UK if you want any other kind of unit, this ensure that you are not hit with import tax when the unit passes though customs. Currently GBAX only offer BLU+s, but they offer units guaranteed up to 166Mhz, but craigix has hinted that soon he may only offer units that are guaranteed up to 160Mhz due to the BLU+’s poor over-clocking ability.

In the US Jr2Swiss’ shop GP32z seems to be the cheapest option. Jr2Swiss offers glass screens, which make the GP32 more clear and harder to scratch.

It used to be suggested that the other best place to buy your GP32 from was Lik-Sang but at the time of writing they currently don’t stock any GP32s due to the BLU+ problem. So for the rest of the world it’s probably worth buying from Shibuya or GBAX if in Europe, or from Ebay in the rest of the world.

Starting up
If you have the BLU, it's already set up to run downloadable games just fine. No registration hassle required, You can skip this section. For FLU or regular GP32 users, however:

You can run commercial games now just by putting in the SMC and playing. To play free games and download games off the Internet, you must register your GP32.

You do so at http://www.gp32.com/ - the steps are: download USB drivers, install them, connect your gp32 to your pc, run the identification program, get your account. With your account you can then download the free launcher. This is basically a menu of free games, put .fxe (game) files into your GPMM directory and you're set. If you have trouble registering, try clearing out your cookies and try again - this seems to have solved several problems before.

If you really can't download the stuff, you'll need to use GPS2 (a free tool from Darkfader's site, Firefly's drivers, and then get an encrypted freelauncher from #gp32. Try #gp32 on EFnet for details.

First you've got to format the SMC, then put .fxe files into GPMM. MP3s go into MP3, commercial games into GAME. Often you will get ZPK files - using PC Link, choose File -> Install to install them. Finally, emulators might require you put ROMs in a specific place, check the read me. For example, CaSTaway needs things to go into GPMM\ATARIST.

Unfortunately you need to register again using a different identification program to use Entware's JoyGP service and download commercial games and Movie Park.

What do I see when I boot up?
If you have the NLU or FLU, the long, annoying Gamepark intro. Ok not that long. Then a menu appears (press SELECT to change mode, START to go into it). There are three modes: MP3 shows up a play list of all your songs, with play/stop/fast-forward etc. and an equaliser (R+B exits). PC-LINK will ready the GP32 for PC-Link transfer - it justs waits. Close PC-Link on your computer and unplug the USB, and the GP32 returns to the menu. Finally GAME shows your commercial games. If you have the Free Launcher, this will also appear, choose this and a list of non-commercial games will appear.

If you have the BLU or BLU+ you’re greeted by the ‘European firmware’, after the Gamepark Logo you have two options “GAME” which allows you to boot software and “PC-LINK” which links to the Computer. The MP3 player was discontinued in the ‘European firmware’.

I’ll also list the options for the Slubman firmware as it is remarked to be one of (if not the) best firmwares for the GP32. If the unit has been flashed to Slubman firmware you will have five options when you boot up. “LAUNCHER” loads software, “EXPLORER” acts as a file manager for the SMC allowing you to create directories, rename/delete files and lets you see how much space is left on your SMC, “PC-LINK” either boots phoDrive which is a modified version of GPDrive or lets you link to the PC-LINK depending on which version of the Slubman firmware is on the unit, “RF-LINK” isn’t implemented yet and “FORMAT” lets you format the SMC.

MP3 and OGG
The GP32 has a slew of different MP3 players most of them very good and perfectly capable at playing your music. The built in MP3 player on the NLU can play many MP3s as long as they are renamed to 8.3 characters, like Windows 3.1/DOS. ID3 tags, however are supported so you see full filenames. However, your bitrate is limited to around 128/192 kbps. Later versions of the offical MP3 player don’t have this bitrate restriction and aren’t built into the firmware (they have to be installed via PC-link).

However a very viable alternative to MP3s is OGG files, OGG files are an open source alternative to MP3. The GP32 has it’s only perfectly functional OGG Vorbis player SvOrbis, currently it’s in it’s 0.9 version and is said to be very good my many people. It’s well worth trying, although you will have to re-encode your CDs or MP3s again. You can find software to do this on the official Ogg Vorbis Website.

Video
There are two programs that play DivX videos on the GP32, Moviepark, which is now out of date, and Gpcinema, which supersedes Moviepark and is available from Entware and the GP32 file archive.

To play video you will have to encode them yourself or download them from the GP32 Theater. To encode videos yourself you will have to use VirtualDub to convert movies into a format the GP32 can play. A guide for doing this is
on GP32 World.

Just tell me the VirtualDub settings.
Cue rcx21000:
Audio:
Codec: Mpeg Layer 3
Audio Sampling Rate: 11,050Hz-22,010Hz (I recommend 11,050)
Stereo (Mono works for me but crashes some units)

Video:
Codec: 4.12 Divx
Res: 320 x 240 or 320 x 172 (320x240 strongly recommended)
Framerate: 10FPS (decimate by 2 or 3, do not type in a new framerate. Fps < 10 is also ok)
Bitrate: 64-128kbps (nothing else!)

Homebrew
Currently the GP32 is undergoing a bit of a renaissance with regard to Homebrew games, after Lacuna won the GBAX.com “16 days later” competition, and after Fenix became more accessible Homebrew games started to come into the open a bit more. There are many good examples but I’ll list a few of the best here

Lacuna – A fast paced addictive game, it has everything that made Tetris great about it, it’s easy to pick up and it’s got very catchy music. You fly though tunnels trying not to hit walls, while it sounds so-so it certainly isn’t. I find I set out to play it for five minutes in breaks from work, except I’ll still be laying it twenty minutes later. It won 16 days later so I’m not alone in thinking much of this game.

Numo – it’s a real shame that this game choose to use soft core pornography to try and make the game more interesting. It’ a simple, but fairly fun Puzzle game. It involves careful planning and a (slightly) mathematical persona. If you just play the cartoon levels you can see it’s got a lot of potential, if the author could release a few (tame) picture sets this game would almost be perfect, as it is it’s slightly mired by the pornographic picture sets.
 

johncross85

Startled By Midgets
Joined
Nov 3, 2003
Messages
341
Location
Newton, UK
Website
Visit site
^
That'll come in handy - cheers!


I'm afraid there's going to be a bit of a delay launching the site as I am currently working on a short-term contract away from home... No PC or web connection where I am staying so no new additions to the site.

Hopefully I'll get going again in a few weeks.

J(ohn)
 
Top