Dingoo Will Not Load Flasher Script After Nand Write


HydraLancer

Still Fresh
Joined
Nov 9, 2005
Messages
55
Age
36
Location
Atlanta GA, USA
Website
Visit site
Hello

I am basically trying to flash the NAND for a friend's Dingoo, I am using the rather obnoxious "Idiot's guide" to try to flash the NAND, and everything goes good, until the part where it says the Dingoo is supposed to magically come back to life after the NAND write. This is after the second and last usbtool command line, and the flash options are supposed to appear on the Dingoo screen.

I have followed everything as far as I can see, but I don't know why the screen is not coming on,

The Dingoo reboots just fine into the normal firmware, but no Dual Boot Dingux yet

Help would be much appreciated

Thank you.
 

darfgarf

Well-Known Member
Joined
Dec 8, 2009
Messages
1,125
Age
31
Location
Blighty
Website
www.gfrancisdev.co.uk
write it twice :p

or at least that's what my old one used to need doing, other than that, search the dingoonity forum, pretty much every problem has been solved before
 

zear_

Member
Joined
Jan 26, 2009
Messages
119
This is a common problem and there's a fix for it: http://boards.dingoonity.org/dingoonity-news/hwinit_2-for-dingux-installer-859
 
Top