Help Please


evilmarshy

Still Fresh
Hello, I have 2.0 and I recently installed a new skin. It was working fine until I restarted my GP2X. The black screen takes slightly longer to load and im stuck solid on the green screen. How can I fix this. I saw something about reflashing, How do I do this?
 
plug in the power supply and old start and select... it should say firmware upgrading. LEave it alone once that process has started.
 
PokeParadox posted on Aug 23 2006 at 10:39 AM said:
plug in the power supply and old start and select... it should say firmware upgrading. LEave it alone once that process has started.

Im using recharagables and It still does nothin. Do I hold start and select then switch it on or just after I switch it on?
 
Last edited by a moderator:
hmm make sure your batts have a decent amount of charge before doing this, the process has to complete. But yes hold start and select either before or as you switch on the GP2X.

There should be some files on the SD card from the skin also...
 
if you have the download, just re-extract them to your SD, and try again.

Otherwise re-download.
 
:p uhh that leads to another problem no SD reader. Is there a way I can access the SD from the USB through windows. I dunno GP2X Drivers for windows.
 
evilmarshyx posted on Aug 23 2006 at 11:59 AM said:
:p uhh that leads to another problem no SD reader. Is there a way I can access the SD from the USB through windows. I dunno GP2X Drivers for windows.

My recommendation is to buy an SD card reader, they are only a few pounds / dollars. Make sure you get a USB2 reader
 
Last edited by a moderator:
Go to the options and enable the menu extension, then scroll down in the options screen for the ip settings.
 
Back