Help with wifi and couple of other things....


dosteridge

I play, therefore I am?
Joined
Dec 28, 2005
Messages
447
Age
47
Location
Birmingham UK
Website
Visit site
Hi Folks,


Some of you will probably remember me from GP32x, been there since my GP32 days! Anyway, I thought it time I joined this new forum.


I have had a Pandora since June last year and recently had a replacement unit sent to me due to one or two minor issues.


Whilst on the subject to of obtaining my replacement unit can I just publically state that Jocelyne and Debs have been exceptionally helpful and their service is second to none. Craig, if you read this please let them know how grateful I am (just mention Spot the dog).


Now, on to my biggest issue. I am having problems connecting to my home wifi (unsecure), the status just shows 'disconnected' and when I try to connect a message pops up saying 'connection has been disconnected'. Some times the Pandora says 'no device avalible'.


My previous unit automatically connected without any input from me at all. I have played around with the 'edit accounts' and all that and can't get it to work. Last night I reflashed the unit, but still the same issue!


I should add that my computed knowledge is rather limited, I fumbled my way through my various GP32's, 2X and dingoos! so please talk to me in simple terms.


On another note, PSCX is absolutly fantastic:) I was wondering if anybody has got Starwars The Phantom Menace to work?


Also on pscx, I can not get past Natlas Mines on Tomb Raider 1, it keeps crashing, has anybody else got past this level?


And finally a request, I love Atari Lynx - it's my all time favorite console and the emulator on the Pandora is superb. I would like to ask anybody with the necessary skill and ability to add save states. I have a wife, 3 kids, a dog and professional job and can only grab a few minutes here and there for gaming which is why this is so important to me.


Thank you for taking the time to read my waffle, any assistance with the wifi would be very much appreciated.


Kevin
 
What firmware version was your old Pandora on and what version is the new one on?


Your old Pandora might have been set for the wifi to be always on, with HF5 you have to manually turn it on in the menu.


After that it should just find the wifi and ask if you want to connect, does it see the network?
 
Hi Craig,


My old unit was HF4, the new unit is HF5. When it first boots if I toggle wifi it says 'disabling wifi' and when I toggle it back on it says 'enabling wifi' and then a message pops up at the bottom says 'the connection has been disconnected'. I don't think it looks for the network at all, I don't get any other messages other than above. The connection says 'never used'


Any idea's?
 
I'm sorry, I'm useless here, but tech support from the inventor! Does it get better? It's like having Bill Gates fix your Windows based PC...
 
maybe posting what the output file for op_wifi.out says located in Filesytem/tmp may shed some light ?
 
There is no such file in their, I have fam-kevin, iconcache, keyring-TVm7cm, orbit-kevin, pulse-PKdhtXMmr18n, currentuser and gui.stop.


All meaningless to the likes of me i'm afraid!
 
Hi, I had tried deleting the whole list before I reflashed, but sadly to no avail:-(


Here is the dmesg thing, I hope this lot means something to you guys.


kevin-openpandora:~/Desktop$ dmesg


tyS0 at MMIO 0x49020000 (irq = 74) is a ST16654


[ 10.087829] console [ttyS0] enabled


[ 10.532714] brd: module loaded


[ 10.538085] loop: module loaded


[ 10.541442] set_opp: OPP 3 set


[ 10.544586] pndctrl loaded.


[ 10.547515] usbcore: registered new interface driver asix


[ 10.553070] usbcore: registered new interface driver cdc_ether


[ 10.559051] usbcore: registered new interface driver rndis_host


[ 10.565032] i2c /dev entries driver


[ 10.569610] input: power-button as /devices/virtual/input/input0


[ 10.597320] triton2 power button driver initialized


[ 10.603363] Driver 'sd' needs updating - please use bus_type methods


[ 10.609985] omap2-nand driver initializing


[ 10.615264] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)


[ 10.624420] cmdlinepart partition parsing not available


[ 10.629730] Creating 5 MTD partitions on "omap2-nand":


[ 10.634887] 0x00000000-0x00080000 : "xloader"


[ 10.639862] 0x00080000-0x00260000 : "uboot"


[ 10.645080] 0x00260000-0x00280000 : "uboot-env"


[ 10.649902] 0x00280000-0x00c80000 : "boot"


[ 10.658477] 0x00c80000-0x20000000 : "rootfs"


[ 10.873260] UBI: attaching mtd4 to ubi0


[ 10.877105] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 10.883453] UBI: logical eraseblock size: 129024 bytes


[ 10.888916] UBI: smallest flash I/O unit: 2048


[ 10.893646] UBI: sub-page size: 512


[ 10.898315] UBI: VID header offset: 512 (aligned 512)


[ 10.904205] UBI: data offset: 2048


[ 12.163818] UBI: attached mtd4 to ubi0


[ 12.167663] UBI: MTD device name: "rootfs"


[ 12.172760] UBI: MTD device size: 499 MiB


[ 12.177764] UBI: number of good PEBs: 3992


[ 12.182495] UBI: number of bad PEBs: 4


[ 12.186981] UBI: max. allowed volumes: 128


[ 12.191650] UBI: wear-leveling threshold: 4096


[ 12.196380] UBI: number of internal volumes: 1


[ 12.200866] UBI: number of user volumes: 1


[ 12.205352] UBI: available PEBs: 0


[ 12.209838] UBI: total number of reserved PEBs: 3992


[ 12.214843] UBI: number of PEBs reserved for bad PEB handling: 39


[ 12.220977] UBI: max/mean erase counter: 7/1


[ 12.225280] UBI: image sequence number: 978767716


[ 12.230072] UBI: attaching mtd3 to ubi1


[ 12.233947] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 12.240264] UBI: logical eraseblock size: 129024 bytes


[ 12.245727] UBI: smallest flash I/O unit: 2048


[ 12.250457] UBI: sub-page size: 512


[ 12.255126] UBI: VID header offset: 512 (aligned 512)


[ 12.260986] UBI: data offset: 2048


[ 12.267822] UBI: background thread "ubi_bgt0d" started, PID 29


[ 12.310577] UBI: attached mtd3 to ubi1


[ 12.314361] UBI: MTD device name: "boot"


[ 12.319335] UBI: MTD device size: 10 MiB


[ 12.324249] UBI: number of good PEBs: 80


[ 12.328826] UBI: number of bad PEBs: 0


[ 12.333312] UBI: max. allowed volumes: 128


[ 12.337951] UBI: wear-leveling threshold: 4096


[ 12.342712] UBI: number of internal volumes: 1


[ 12.347198] UBI: number of user volumes: 1


[ 12.351654] UBI: available PEBs: 0


[ 12.356140] UBI: total number of reserved PEBs: 80


[ 12.360961] UBI: number of PEBs reserved for bad PEB handling: 2


[ 12.367034] UBI: max/mean erase counter: 18/8


[ 12.371429] UBI: image sequence number: 328488659


[ 12.376190] usbmon: debugfs is not available


[ 12.380889] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller


[ 12.386871] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1


[ 12.394683] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800


[ 12.400421] UBI: background thread "ubi_bgt1d" started, PID 30


[ 12.409606] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004


[ 12.417602] usb usb1: configuration #1 chosen from 1 choice


[ 12.423400] hub 1-0:1.0: USB hub found


[ 12.427276] hub 1-0:1.0: 3 ports detected


[ 12.535308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002


[ 12.542144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[ 12.549438] usb usb1: Product: OMAP-EHCI Host Controller


[ 12.554809] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd


[ 12.561065] usb usb1: SerialNumber: ehci-omap.0


[ 12.565704] Initializing USB Mass Storage driver...


[ 12.570770] usbcore: registered new interface driver usb-storage


[ 12.576843] USB Mass Storage support registered.


[ 12.581634] usbcore: registered new interface driver libusual


[ 12.587646] mice: PS/2 mouse device common for all mice


[ 12.613494] input: gpio-keys as /devices/platform/gpio-keys/input/input1


[ 12.683654] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2


[ 12.739288] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3


[ 12.792938] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4


[ 12.847686] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0


[ 12.858032] bq27x00-battery 3-0055: support ver. 1.1.0 enabled


[ 12.864013] Bluetooth: HCI UART driver ver 2.2


[ 12.868499] Bluetooth: HCI H4 protocol initialized


[ 12.873352] Bluetooth: HCILL protocol initialized


[ 12.878143] hci_h4p hci_h4p: Registering HCI H4P device


[ 13.112762] hci_h4p hci_h4p: No cts from bt chip


[ 13.117462] hci_h4p: probe of hci_h4p failed with error -110


[ 13.123504] mmci-omap mmci-omap.0: Failed to get debounce clock


[ 13.230072] mmci-omap mmci-omap.1: Failed to get debounce clock


[ 13.231231] mmci-omap mmci-omap.2: Failed to get debounce clock


[ 13.231597] Registered led device: pandora::sd1


[ 13.236267] Registered led device: pandora::sd2


[ 13.240997] Registered led device: pandora::bluetooth


[ 13.246185] Registered led device: pandora::wifi


[ 13.251159] Registered led device: pandora::keypad_bl


[ 13.256469] Registered led device: pandora::power


[ 13.261566] Registered led device: pandora::charger


[ 13.266662] usbcore: registered new interface driver usbhid


[ 13.272338] usbhid: v2.6:USB HID core driver


[ 13.276855] Advanced Linux Sound Architecture Driver Version 1.0.17.


[ 13.283477] ASoC version 0.13.2


[ 13.286804] OMAP3 Pandora SoC init


[ 13.290374] TWL4030 Audio Codec init


[ 13.295623] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok


[ 13.302551] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok


[ 13.315582] ALSA device list:


[ 13.318634] #0: omap3pandora (twl4030)


[ 13.322845] TCP cubic registered


[ 13.326141] NET: Registered protocol family 17


[ 13.330657] NET: Registered protocol family 15


[ 13.335174] Bluetooth: L2CAP ver 2.11


[ 13.338867] Bluetooth: L2CAP socket layer initialized


[ 13.343994] Bluetooth: SCO (Voice Link) ver 0.6


[ 13.348571] Bluetooth: SCO socket layer initialized


[ 13.353668] Bluetooth: RFCOMM socket layer initialized


[ 13.358917] Bluetooth: RFCOMM TTY layer initialized


[ 13.363861] Bluetooth: RFCOMM ver 1.10


[ 13.367645] Bluetooth: BNEP (Ethernet Emulation) ver 1.3


[ 13.373016] Bluetooth: HIDP (Human Interface Emulation) ver 1.2


[ 13.379516] RPC: Registered udp transport module.


[ 13.384246] RPC: Registered tcp transport module.


[ 13.389099] ThumbEE CPU extension supported.


[ 13.393402] Disabling unused clock "sr2_fck"


[ 13.393402] Disabling unused clock "sr1_fck"


[ 13.393432] Disabling unused clock "mcbsp_fck"


[ 13.393432] Disabling unused clock "mcbsp_fck"


[ 13.393463] Disabling unused clock "mcbsp_fck"


[ 13.393463] Disabling unused clock "mcbsp_ick"


[ 13.393493] Disabling unused clock "mcbsp_ick"


[ 13.393493] Disabling unused clock "mcbsp_ick"


[ 13.393524] Disabling unused clock "gpt2_ick"


[ 13.393524] Disabling unused clock "gpt3_ick"


[ 13.393554] Disabling unused clock "gpt4_ick"


[ 13.393554] Disabling unused clock "gpt5_ick"


[ 13.393554] Disabling unused clock "gpt6_ick"


[ 13.393585] Disabling unused clock "gpt7_ick"


[ 13.393585] Disabling unused clock "gpt8_ick"


[ 13.393615] Disabling unused clock "gpt9_ick"


[ 13.393615] Disabling unused clock "wdt3_ick"


[ 13.393646] Disabling unused clock "wdt3_fck"


[ 13.393646] Disabling unused clock "gpio2_dbck"


[ 13.393676] Disabling unused clock "gpio3_dbck"


[ 13.393676] Disabling unused clock "gpio5_dbck"


[ 13.393707] Disabling unused clock "gpt9_fck"


[ 13.393707] Disabling unused clock "gpt8_fck"


[ 13.393737] Disabling unused clock "gpt7_fck"


[ 13.393737] Disabling unused clock "gpt6_fck"


[ 13.393737] Disabling unused clock "gpt5_fck"


[ 13.393768] Disabling unused clock "gpt4_fck"


[ 13.393768] Disabling unused clock "gpt3_fck"


[ 13.393798] Disabling unused clock "gpt2_fck"


[ 13.393798] Disabling unused clock "gpt1_ick"


[ 13.393829] Disabling unused clock "wdt1_ick"


[ 13.393829] Disabling unused clock "wdt2_ick"


[ 13.393859] Disabling unused clock "wdt2_fck"


[ 13.393859] Disabling unused clock "gpio1_dbck"


[ 13.393890] Disabling unused clock "gpt1_fck"


[ 13.393890] Disabling unused clock "cam_ick"


[ 13.393920] Disabling unused clock "cam_mclk"


[ 13.393920] Disabling unused clock "des1_ick"


[ 13.393951] Disabling unused clock "sha11_ick"


[ 13.393951] Disabling unused clock "rng_ick"


[ 13.393981] Disabling unused clock "aes1_ick"


[ 13.393981] Disabling unused clock "ssi_ick"


[ 13.393981] Disabling unused clock "mailboxes_ick"


[ 13.394012] Disabling unused clock "mcbsp_ick"


[ 13.394012] Disabling unused clock "mcbsp_ick"


[ 13.394073] Disabling unused clock "gpt10_ick"


[ 13.394073] Disabling unused clock "gpt11_ick"


[ 13.394104] Disabling unused clock "uart2_ick"


[ 13.394104] Disabling unused clock "i2c_ick"


[ 13.394134] Disabling unused clock "hdq_ick"


[ 13.394134] Disabling unused clock "mspro_ick"


[ 13.394165] Disabling unused clock "des2_ick"


[ 13.394165] Disabling unused clock "sha12_ick"


[ 13.394165] Disabling unused clock "aes2_ick"


[ 13.394195] Disabling unused clock "icr_ick"


[ 13.394195] Disabling unused clock "pka_ick"


[ 13.394226] Disabling unused clock "ssi_ssr_fck"


[ 13.394226] Disabling unused clock "hdq_fck"


[ 13.394256] Disabling unused clock "uart2_fck"


[ 13.394256] Disabling unused clock "mcbsp_fck"


[ 13.394287] Disabling unused clock "mcbsp_fck"


[ 13.394287] Disabling unused clock "i2c_fck"


[ 13.394287] Disabling unused clock "mspro_fck"


[ 13.394317] Disabling unused clock "gpt11_fck"


[ 13.394317] Disabling unused clock "gpt10_fck"


[ 13.394348] Disabling unused clock "iva2_ck"


[ 13.394348] Disabling unused clock "dpll4_m6x2_ck"


[ 13.394378] Disabling unused clock "dpll4_m5x2_ck"


[ 13.394409] Disabling unused clock "dpll3_m3x2_ck"


[ 13.394409] Disabling unused clock "sys_clkout1"


[ 13.394439] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1


[ 13.433532] Console: switching to colour frame buffer device 100x30


[ 13.526977] mmc0: host does not support reading read-only switch. assuming write-enable.


[ 13.535156] mmc0: new high speed SDHC card at address 8520


[ 13.541076] mmcblk0: mmc0:8520 SD16G 15859712KiB


[ 13.546112] mmcblk0: p1


[ 13.622833] twl4030_rtc twl4030_rtc: setting system clock to 2011-03-29 20:24:19 UTC (1301430259)


[ 13.742553] UBIFS: mounted UBI device 0, volume 0, name "rootfs"


[ 13.748687] UBIFS: file system size: 508096512 bytes (496188 KiB, 484 MiB, 3938 LEBs)


[ 13.756774] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)


[ 13.764160] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 13.770050] UBIFS: default compressor: lzo


[ 13.774169] UBIFS: reserved for root: 0 bytes (0 KiB)


[ 13.780639] VFS: Mounted root (ubifs filesystem).


[ 13.785552] Freeing init memory: 148K


[ 14.089172] mmc1: host does not support reading read-only switch. assuming write-enable.


[ 14.097442] mmc1: new SDHC card at address b1f8


[ 14.102447] mmcblk1: mmc1:b1f8 SD16G 15558144KiB


[ 14.107513] mmcblk1: p1


[ 14.998138] udev: starting version 151


[ 16.058380] ads7846 spi1.0: touchscreen, irq 254


[ 16.063629] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5


[ 21.450653] NET: Registered protocol family 10


[ 21.487457] FAT: bogus number of reserved sectors


[ 21.492279] VFS: Can't find a valid FAT filesystem on dev mmcblk1.


[ 21.571044] FAT: bogus number of reserved sectors


[ 21.575958] VFS: Can't find a valid FAT filesystem on dev mmcblk0.


[ 21.960845] FAT: bogus number of reserved sectors


[ 21.965637] VFS: Can't find a valid FAT filesystem on dev mmcblk0.


[ 22.007354] FAT: bogus number of reserved sectors


[ 22.012176] VFS: Can't find a valid FAT filesystem on dev mmcblk1.


[ 22.178680] UBIFS: mounted UBI device 1, volume 0, name "boot"


[ 22.184631] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)


[ 22.192016] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)


[ 22.199310] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 22.205169] UBIFS: default compressor: lzo


[ 22.209320] UBIFS: reserved for root: 396117 bytes (386 KiB)


[ 22.699432] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC


[ 22.701629] mmcblk0: retrying using single block read


[ 23.605041] dpll1_ck rate: 600000000


[ 23.608734] arm_fck rate: 600000000


[ 23.612365] PLL_MPU rate: 600000000


[ 23.675964] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6


[ 23.925964] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7


[ 71.802459] aufs test_add:243:mount[1208]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777


[ 72.680053] Generic kernel compatibility enabled based on linux-next next-20100113


[ 72.992675] cfg80211: Calling CRDA to update world regulatory domain


[ 73.742858] lib80211: common routines for IEEE802.11 drivers


[ 73.748748] lib80211_crypt: registered algorithm 'NULL'


[ 73.776763] lib80211_crypt: registered algorithm 'TKIP'


[ 73.803253] lib80211_crypt: registered algorithm 'WEP'


[ 73.829986] lib80211_crypt: registered algorithm 'CCMP'


[ 73.945465] Pandora WiFi: Probe started


[ 73.972167] Sending insert event for MMC3...


[ 73.976470] Pandora WiFi: Probe done


[ 74.026214] mmc2: card claims to support voltages below the defined range. These will be ignored.


[ 74.035186] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.


[ 74.058166] mmc2: new SDIO card at address 0001


[ 74.152191] wl1251: using dedicated interrupt line


[ 74.497650] phy0: Selected rate control algorithm 'minstrel'


[ 74.498443] wl1251: loaded


[ 74.501190] wl1251: initialized


[ 75.901885] sdio_reset_comm():


[ 75.917785] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin


[ 78.468109] wl1251: ERROR timeout waiting for the hardware to complete initialization


[ 93.855041] sdio_reset_comm():


[ 95.650177] wl1251: ERROR timeout waiting for the hardware to complete initialization


[ 95.714630] sdio_reset_comm():


[ 97.500793] wl1251: ERROR timeout waiting for the hardware to complete initialization


[ 120.358673] aufs test_add:243:mount[1551]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777


[ 120.651733] Pandora WiFi: Remove started


[ 120.651733] Sending remove event for MMC3...


[ 120.683288] Pandora WiFi: Remove finished


[ 120.826873] wl1251: unloaded


[ 120.870971] mmc2: card 0001 removed


kevin-openpandora:~/Desktop$
 
seems your wifi chip is not working properly. whilst i probably think it's a hardware issue, i suggest you to install the latest Notaz beta wifi driver

I have downloaded the file and placed it on my sd card, but have no idea how to install it (like I say I have limited understanding of such matters) any tips would be great. It has a file extention of .IPK?
 
Last edited by a moderator:
yes, run the following command => sudo opkg install <filename>


type your password and voilá


reboot
Thanks for your help Alerino, no joy though!


So is this a hardware issue, do I need to send it back for repair or is there anything else I can try first?
 
Hi, here's the list:


kevin-openpandora:~/Desktop$ dmesg


ing enabled


[ 10.087188] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654


[ 10.087249] console [ttyS0] enabled


[ 10.532104] brd: module loaded


[ 10.537506] loop: module loaded


[ 10.540832] set_opp: OPP 3 set


[ 10.543975] pndctrl loaded.


[ 10.546936] usbcore: registered new interface driver asix


[ 10.552490] usbcore: registered new interface driver cdc_ether


[ 10.558471] usbcore: registered new interface driver rndis_host


[ 10.564453] i2c /dev entries driver


[ 10.569030] input: power-button as /devices/virtual/input/input0


[ 10.596679] triton2 power button driver initialized


[ 10.602783] Driver 'sd' needs updating - please use bus_type methods


[ 10.609405] omap2-nand driver initializing


[ 10.614654] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)


[ 10.623809] cmdlinepart partition parsing not available


[ 10.629119] Creating 5 MTD partitions on "omap2-nand":


[ 10.634277] 0x00000000-0x00080000 : "xloader"


[ 10.639251] 0x00080000-0x00260000 : "uboot"


[ 10.644470] 0x00260000-0x00280000 : "uboot-env"


[ 10.649291] 0x00280000-0x00c80000 : "boot"


[ 10.657867] 0x00c80000-0x20000000 : "rootfs"


[ 10.873046] UBI: attaching mtd4 to ubi0


[ 10.876922] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 10.883239] UBI: logical eraseblock size: 129024 bytes


[ 10.888702] UBI: smallest flash I/O unit: 2048


[ 10.893463] UBI: sub-page size: 512


[ 10.898101] UBI: VID header offset: 512 (aligned 512)


[ 10.903991] UBI: data offset: 2048


[ 12.165039] UBI: attached mtd4 to ubi0


[ 12.168884] UBI: MTD device name: "rootfs"


[ 12.173980] UBI: MTD device size: 499 MiB


[ 12.178985] UBI: number of good PEBs: 3992


[ 12.183746] UBI: number of bad PEBs: 4


[ 12.188232] UBI: max. allowed volumes: 128


[ 12.192901] UBI: wear-leveling threshold: 4096


[ 12.197631] UBI: number of internal volumes: 1


[ 12.202117] UBI: number of user volumes: 1


[ 12.206604] UBI: available PEBs: 0


[ 12.211059] UBI: total number of reserved PEBs: 3992


[ 12.216094] UBI: number of PEBs reserved for bad PEB handling: 39


[ 12.222229] UBI: max/mean erase counter: 7/1


[ 12.226531] UBI: image sequence number: 978767716


[ 12.231323] UBI: attaching mtd3 to ubi1


[ 12.235168] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 12.241516] UBI: logical eraseblock size: 129024 bytes


[ 12.246978] UBI: smallest flash I/O unit: 2048


[ 12.251708] UBI: sub-page size: 512


[ 12.256347] UBI: VID header offset: 512 (aligned 512)


[ 12.262237] UBI: data offset: 2048


[ 12.269134] UBI: background thread "ubi_bgt0d" started, PID 29


[ 12.311767] UBI: attached mtd3 to ubi1


[ 12.315612] UBI: MTD device name: "boot"


[ 12.320526] UBI: MTD device size: 10 MiB


[ 12.325469] UBI: number of good PEBs: 80


[ 12.330017] UBI: number of bad PEBs: 0


[ 12.334503] UBI: max. allowed volumes: 128


[ 12.339172] UBI: wear-leveling threshold: 4096


[ 12.343902] UBI: number of internal volumes: 1


[ 12.348388] UBI: number of user volumes: 1


[ 12.352844] UBI: available PEBs: 0


[ 12.357360] UBI: total number of reserved PEBs: 80


[ 12.362182] UBI: number of PEBs reserved for bad PEB handling: 2


[ 12.368225] UBI: max/mean erase counter: 18/9


[ 12.372619] UBI: image sequence number: 328488659


[ 12.377380] usbmon: debugfs is not available


[ 12.382080] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller


[ 12.388061] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1


[ 12.395904] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800


[ 12.401641] UBI: background thread "ubi_bgt1d" started, PID 30


[ 12.416839] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004


[ 12.424865] usb usb1: configuration #1 chosen from 1 choice


[ 12.430633] hub 1-0:1.0: USB hub found


[ 12.434539] hub 1-0:1.0: 3 ports detected


[ 12.542480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002


[ 12.549316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[ 12.556610] usb usb1: Product: OMAP-EHCI Host Controller


[ 12.561981] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd


[ 12.568237] usb usb1: SerialNumber: ehci-omap.0


[ 12.572906] Initializing USB Mass Storage driver...


[ 12.577941] usbcore: registered new interface driver usb-storage


[ 12.584014] USB Mass Storage support registered.


[ 12.588806] usbcore: registered new interface driver libusual


[ 12.594848] mice: PS/2 mouse device common for all mice


[ 12.620666] input: gpio-keys as /devices/platform/gpio-keys/input/input1


[ 12.690826] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2


[ 12.746490] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3


[ 12.800140] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4


[ 12.854888] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0


[ 12.865234] bq27x00-battery 3-0055: support ver. 1.1.0 enabled


[ 12.871215] Bluetooth: HCI UART driver ver 2.2


[ 12.875671] Bluetooth: HCI H4 protocol initialized


[ 12.880523] Bluetooth: HCILL protocol initialized


[ 12.885314] hci_h4p hci_h4p: Registering HCI H4P device


[ 13.119934] hci_h4p hci_h4p: No cts from bt chip


[ 13.124633] hci_h4p: probe of hci_h4p failed with error -110


[ 13.130676] mmci-omap mmci-omap.0: Failed to get debounce clock


[ 13.237274] mmci-omap mmci-omap.1: Failed to get debounce clock


[ 13.238403] mmci-omap mmci-omap.2: Failed to get debounce clock


[ 13.238800] Registered led device: pandora::sd1


[ 13.243469] Registered led device: pandora::sd2


[ 13.248168] Registered led device: pandora::bluetooth


[ 13.253387] Registered led device: pandora::wifi


[ 13.258361] Registered led device: pandora::keypad_bl


[ 13.263671] Registered led device: pandora::power


[ 13.268768] Registered led device: pandora::charger


[ 13.273895] usbcore: registered new interface driver usbhid


[ 13.279541] usbhid: v2.6:USB HID core driver


[ 13.284057] Advanced Linux Sound Architecture Driver Version 1.0.17.


[ 13.290679] ASoC version 0.13.2


[ 13.294006] OMAP3 Pandora SoC init


[ 13.297576] TWL4030 Audio Codec init


[ 13.302825] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok


[ 13.309783] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok


[ 13.322814] ALSA device list:


[ 13.325836] #0: omap3pandora (twl4030)


[ 13.330047] TCP cubic registered


[ 13.333343] NET: Registered protocol family 17


[ 13.337860] NET: Registered protocol family 15


[ 13.342376] Bluetooth: L2CAP ver 2.11


[ 13.346069] Bluetooth: L2CAP socket layer initialized


[ 13.351196] Bluetooth: SCO (Voice Link) ver 0.6


[ 13.355804] Bluetooth: SCO socket layer initialized


[ 13.360870] Bluetooth: RFCOMM socket layer initialized


[ 13.366119] Bluetooth: RFCOMM TTY layer initialized


[ 13.371063] Bluetooth: RFCOMM ver 1.10


[ 13.374847] Bluetooth: BNEP (Ethernet Emulation) ver 1.3


[ 13.380218] Bluetooth: HIDP (Human Interface Emulation) ver 1.2


[ 13.386718] RPC: Registered udp transport module.


[ 13.391448] RPC: Registered tcp transport module.


[ 13.396301] ThumbEE CPU extension supported.


[ 13.400604] Disabling unused clock "sr2_fck"


[ 13.400634] Disabling unused clock "sr1_fck"


[ 13.400634] Disabling unused clock "mcbsp_fck"


[ 13.400665] Disabling unused clock "mcbsp_fck"


[ 13.400665] Disabling unused clock "mcbsp_fck"


[ 13.400695] Disabling unused clock "mcbsp_ick"


[ 13.400695] Disabling unused clock "mcbsp_ick"


[ 13.400726] Disabling unused clock "mcbsp_ick"


[ 13.400726] Disabling unused clock "gpt2_ick"


[ 13.400756] Disabling unused clock "gpt3_ick"


[ 13.400756] Disabling unused clock "gpt4_ick"


[ 13.400756] Disabling unused clock "gpt5_ick"


[ 13.400787] Disabling unused clock "gpt6_ick"


[ 13.400787] Disabling unused clock "gpt7_ick"


[ 13.400817] Disabling unused clock "gpt8_ick"


[ 13.400817] Disabling unused clock "gpt9_ick"


[ 13.400848] Disabling unused clock "wdt3_ick"


[ 13.400848] Disabling unused clock "wdt3_fck"


[ 13.400878] Disabling unused clock "gpio2_dbck"


[ 13.400878] Disabling unused clock "gpio3_dbck"


[ 13.400909] Disabling unused clock "gpio5_dbck"


[ 13.400909] Disabling unused clock "gpt9_fck"


[ 13.400939] Disabling unused clock "gpt8_fck"


[ 13.400939] Disabling unused clock "gpt7_fck"


[ 13.400939] Disabling unused clock "gpt6_fck"


[ 13.400970] Disabling unused clock "gpt5_fck"


[ 13.400970] Disabling unused clock "gpt4_fck"


[ 13.401000] Disabling unused clock "gpt3_fck"


[ 13.401000] Disabling unused clock "gpt2_fck"


[ 13.401031] Disabling unused clock "gpt1_ick"


[ 13.401031] Disabling unused clock "wdt1_ick"


[ 13.401062] Disabling unused clock "wdt2_ick"


[ 13.401092] Disabling unused clock "wdt2_fck"


[ 13.401123] Disabling unused clock "gpio1_dbck"


[ 13.401123] Disabling unused clock "gpt1_fck"


[ 13.401153] Disabling unused clock "cam_ick"


[ 13.401153] Disabling unused clock "cam_mclk"


[ 13.401153] Disabling unused clock "des1_ick"


[ 13.401184] Disabling unused clock "sha11_ick"


[ 13.401184] Disabling unused clock "rng_ick"


[ 13.401214] Disabling unused clock "aes1_ick"


[ 13.401214] Disabling unused clock "ssi_ick"


[ 13.401245] Disabling unused clock "mailboxes_ick"


[ 13.401245] Disabling unused clock "mcbsp_ick"


[ 13.401275] Disabling unused clock "mcbsp_ick"


[ 13.401275] Disabling unused clock "gpt10_ick"


[ 13.401275] Disabling unused clock "gpt11_ick"


[ 13.401306] Disabling unused clock "uart2_ick"


[ 13.401306] Disabling unused clock "i2c_ick"


[ 13.401336] Disabling unused clock "hdq_ick"


[ 13.401336] Disabling unused clock "mspro_ick"


[ 13.401367] Disabling unused clock "des2_ick"


[ 13.401367] Disabling unused clock "sha12_ick"


[ 13.401367] Disabling unused clock "aes2_ick"


[ 13.401397] Disabling unused clock "icr_ick"


[ 13.401397] Disabling unused clock "pka_ick"


[ 13.401428] Disabling unused clock "ssi_ssr_fck"


[ 13.401428] Disabling unused clock "hdq_fck"


[ 13.401458] Disabling unused clock "uart2_fck"


[ 13.401458] Disabling unused clock "mcbsp_fck"


[ 13.401489] Disabling unused clock "mcbsp_fck"


[ 13.401489] Disabling unused clock "i2c_fck"


[ 13.401519] Disabling unused clock "mspro_fck"


[ 13.401519] Disabling unused clock "gpt11_fck"


[ 13.401550] Disabling unused clock "gpt10_fck"


[ 13.401550] Disabling unused clock "iva2_ck"


[ 13.401580] Disabling unused clock "dpll4_m6x2_ck"


[ 13.401580] Disabling unused clock "dpll4_m5x2_ck"


[ 13.401611] Disabling unused clock "dpll3_m3x2_ck"


[ 13.401611] Disabling unused clock "sys_clkout1"


[ 13.401641] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1


[ 13.440734] Console: switching to colour frame buffer device 100x30


[ 13.549743] mmc0: host does not support reading read-only switch. assuming write-enable.


[ 13.557891] mmc0: new high speed SDHC card at address 8520


[ 13.563842] mmcblk0: mmc0:8520 SD16G 15859712KiB


[ 13.568878] mmcblk0: p1


[ 13.630035] twl4030_rtc twl4030_rtc: setting system clock to 2011-03-30 13:08:34 UTC (1301490514)


[ 13.745971] UBIFS: mounted UBI device 0, volume 0, name "rootfs"


[ 13.752044] UBIFS: file system size: 508096512 bytes (496188 KiB, 484 MiB, 3938 LEBs)


[ 13.760131] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)


[ 13.767517] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 13.773406] UBIFS: default compressor: lzo


[ 13.777557] UBIFS: reserved for root: 0 bytes (0 KiB)


[ 13.783966] VFS: Mounted root (ubifs filesystem).


[ 13.788879] Freeing init memory: 148K


[ 14.111724] mmc1: host does not support reading read-only switch. assuming write-enable.


[ 14.119964] mmc1: new SDHC card at address b1f8


[ 14.124969] mmcblk1: mmc1:b1f8 SD16G 15558144KiB


[ 14.130035] mmcblk1: p1


[ 22.754821] ads7846 spi1.0: touchscreen, irq 254


[ 22.760070] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5


[ 25.661041] FAT: bogus number of reserved sectors


[ 25.665802] VFS: Can't find a valid FAT filesystem on dev mmcblk0.


[ 25.770751] FAT: bogus number of reserved sectors


[ 25.775482] VFS: Can't find a valid FAT filesystem on dev mmcblk1.


[ 26.063110] FAT: bogus number of reserved sectors


[ 26.067901] VFS: Can't find a valid FAT filesystem on dev mmcblk0.


[ 26.114990] FAT: bogus number of reserved sectors


[ 26.119750] VFS: Can't find a valid FAT filesystem on dev mmcblk1.


[ 26.526062] mmci-omap mmci-omap.0: MMC IRQ 0x208000 : ERRI DCRC


[ 26.526367] mmcblk0: retrying using single block read


[ 30.242187] NET: Registered protocol family 10


[ 30.466857] UBIFS: mounted UBI device 1, volume 0, name "boot"


[ 30.472808] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)


[ 30.480194] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)


[ 30.487487] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 30.493347] UBIFS: default compressor: lzo


[ 30.497497] UBIFS: reserved for root: 396117 bytes (386 KiB)


[ 31.330902] dpll1_ck rate: 600000000


[ 31.334533] arm_fck rate: 600000000


[ 31.338134] PLL_MPU rate: 600000000


[ 31.401763] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6


[ 31.628417] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7


[ 86.208770] aufs test_add:243:mount[1263]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777


[ 87.083709] Generic kernel compatibility enabled based on linux-next next-20100113


[ 87.378082] cfg80211: Calling CRDA to update world regulatory domain


[ 88.149108] lib80211: common routines for IEEE802.11 drivers


[ 88.154907] lib80211_crypt: registered algorithm 'NULL'


[ 88.182922] lib80211_crypt: registered algorithm 'TKIP'


[ 88.209136] lib80211_crypt: registered algorithm 'WEP'


[ 88.235839] lib80211_crypt: registered algorithm 'CCMP'


[ 88.351745] Pandora WiFi: Probe started


[ 88.377807] Sending insert event for MMC3...


[ 88.382110] Pandora WiFi: Probe done


[ 88.431854] mmc2: card claims to support voltages below the defined range. These will be ignored.


[ 88.440826] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.


[ 88.463806] mmc2: new SDIO card at address 0001


[ 88.557708] wl1251: using dedicated interrupt line


[ 88.760040] phy0: Selected rate control algorithm 'minstrel'


[ 88.760894] wl1251: loaded


[ 88.763641] wl1251: initialized


[ 90.104370] sdio_reset_comm():


[ 90.120300] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin


[ 92.810363] wl1251: ERROR timeout waiting for the hardware to complete initialization


[ 108.166870] sdio_reset_comm():


[ 109.961853] wl1251: ERROR timeout waiting for the hardware to complete initialization


[ 110.027923] sdio_reset_comm():


[ 111.828094] wl1251: ERROR timeout waiting for the hardware to complete initialization


[ 157.652679] aufs test_add:243:mount[1605]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777


[ 157.944824] Pandora WiFi: Remove started


[ 157.944854] Sending remove event for MMC3...


[ 157.979431] Pandora WiFi: Remove finished


[ 158.107513] wl1251: unloaded


[ 158.152160] mmc2: card 0001 removed


kevin-openpandora:~/Desktop$
 
Back
Top