SuperZaxxon v1.54 RC released


How do i look that up? Im a bit new to Pandora...

Sent from my HTCEVOV4G using Tapatalk 2
 
I'm not quite sure about the SGX side of it; this is the updated kernel that can run the newer SGX drivers and still requires the SGX driver installer PND, right?
 
Yeah, .pnd contains all the binary blobs, they take a lot of space and can't be all included in NAND at once.
That does indeed make sense.

All seems good with this update so far.
 
Something went wrong on my CC.

After the reboot, i lost the keyboard, then i rebooted, and the boot progress bar stayed under "powered". Not led were on.

Pandora button + power switch, i got a black screen.

One more hard reboot and all seems ok now.
 
Also, the charge led works badly, as usual.

The Xfce battery monitor is a better indicator :/. Maybe it would be better to use the same routine as it ?

---EDIT:

Still on my CC, the power button doesn't work. Can't put in low power.

---EDIT2:

I can't even shutdown the unit when holding it.

---EDIT3:

Rebooted the unit again while AC on, same hang with the progress bar staying under "powered".
 
Last edited by a moderator:
Also, the charge led works badly, as usual.

The Xfce battery monitor is a better indicator :/. Maybe it would be better to use the same routine as it ?

---EDIT:

Still on my CC, the power button doesn't work. Can't put in low power.
Works fine for me on cc unit

---EDIT2:

I can't even shutdown the unit when holding it.
This also works fine for me

---EDIT3:

Rebooted the unit again while AC on, same hang with the progress bar staying under "powered".
 
My USB Wifi Dongle (which is has the rtl8192cu chipset) doesn't work anymore when I upgraded to it. Also, the charging LED didn't come one when my Pandora was turned on via an AC Adapter.
 
Last edited by a moderator:
My USB Wifi Dongle (which is has the rtl8192cu chipset) doesn't work anymore when I upgraded to it. Also, the charging LED didn't come one when my Pandora was turned on via an AC Adapter.
Strange, the driver is still there. What's in your /etc/modprobe.conf ?
 
Thanks for the Pandora OS Update :)

Updated on my GHz Pandora successfully, previously i have had SuperZaxxon v1.53 with the Kernel Update for the SGX Driver PND.

For accessing the Internet and updating the OS i've used the WiFi Dongle from ED's Shop : https://www.dragonbox.de/en/accessories/35-caanoo-wifi-dongle-schwarz-1.html .

After rebooting the OS i've avtivated the USB Host and the WiFi Dongle doesn't work anymore . It is not recognising by the Network Icon and only Shows me

"No network connection"  :mellow:

Here's a dmesg Output from the Terminal:

pandora:~$ dmesg

[    0.000000] Linux version 3.2.39 (notaz@pixelinis) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #833 Tue Mar 12 23:57:02 EET 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Pandora Handheld Console
[    0.000000] cma: CMA: reserved 16 MiB at 9e800000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 129536
[    0.000000] free_area_init_node: node 0, pgdat c05b014c, node_mem_map c05e2000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128512
[    0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 506MB = 506MB total
[    0.000000] Memory: 491172k/491172k available, 33116k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0541640   (5350 kB)
[    0.000000]       .init : 0xc0542000 - 0xc0573000   ( 196 kB)
[    0.000000]       .data : 0xc0574000 - 0xc05b08c0   ( 243 kB)
[    0.000000]        .bss : 0xc05b08e4 - 0xc05e1ae0   ( 197 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000152] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.039093] pid_max: default: 32768 minimum: 301
[    0.039337] Mount-cache hash table entries: 512
[    0.039733] Initializing cgroup subsys devices
[    0.039794] CPU: Testing write buffer coherency: ok
[    0.039978] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.040069] Setting up static identity map for 0x803e4578 - 0x803e45d0
[    0.040679] devtmpfs: initialized
[    0.051696] print_constraints: dummy:
[    0.052947] NET: Registered protocol family 16
[    0.054656] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.055053] GPMC revision 5.0
[    0.058044] OMAP GPIO hardware version 2.5
[    0.061248] omap_mux_init: Add partition: #1: core, flags: 0
[    0.067565] Reprogramming SDRC clock to 400000000 Hz
[    0.069702] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.076446]  omap-mcbsp.2: alias fck already exists
[    0.076751]  omap-mcbsp.3: alias fck already exists
[    0.078186] OMAP DMA hardware revision 5.0
[    0.093017] bio: create slab <bio-0> at 0
[    0.094177] print_constraints: vwlan: 1800 mV
[    0.095672] SCSI subsystem initialized
[    0.097961] usbcore: registered new interface driver usbfs
[    0.098175] usbcore: registered new interface driver hub
[    0.098419] usbcore: registered new device driver usb
[    0.109466] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.112609] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.112701] twl4030: power (irq 373) chaining IRQs 376..383
[    0.113250] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.113677] _omap_mux_init_gpio: Could not set gpio192
[    0.114776] _omap_mux_init_gpio: Could not set gpio193
[    0.117340] print_constraints: VUSB1V5: 1500 mV normal standby
[    0.117980] print_constraints: VUSB1V8: 1800 mV normal standby
[    0.118530] print_constraints: VUSB3V1: 3100 mV normal standby
[    0.120086] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.121398] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal
[    0.121978] print_constraints: vdd_core: 600 <--> 1450 mV normal
[    0.122650] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.123352] print_constraints: VDAC: 1800 mV normal standby
[    0.123992] print_constraints: VAUX2: 1800 mV normal standby
[    0.124664] print_constraints: VPLL2: 1800 mV normal standby
[    0.125396] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.126037] print_constraints: VSIM: 2800 mV normal standby
[    0.126647] print_constraints: VAUX1: 3000 mV normal standby
[    0.127288] print_constraints: VAUX4: 3000 mV normal standby
[    0.140716] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[    0.142883] omap-iommu omap-iommu.0: isp registered
[    0.143463] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.144256] Switching to clocksource 32k_counter
[    0.165679] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.171020] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.171051] musb-hdrc: MHDRC RTL version 1.800
[    0.171081] musb-hdrc: setup fifo_mode 4
[    0.171081] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.171569] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    0.172332] NET: Registered protocol family 2
[    0.172485] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.172760] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.173126] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.173339] TCP: Hash tables configured (established 16384 bind 16384)
[    0.173339] TCP reno registered
[    0.173339] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.173370] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.173614] NET: Registered protocol family 1
[    0.173858] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.175537] omap_dsp_init: 600000 bytes @ 9fa00000
[    0.179321] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.194427] VFS: Disk quotas dquot_6.5.2
[    0.194915] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.199707] msgmni has been set to 991
[    0.201477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.201507] io scheduler noop registered
[    0.201507] io scheduler deadline registered
[    0.201568] io scheduler cfq registered (default)
[    0.216369] OMAP DSS rev 2.0
[    0.219451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.221466] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    0.221862] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    0.222259] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    0.222747] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    0.234283] brd: module loaded
[    0.240020] loop: module loaded
[    0.240051] OMAP overclocker loaded.
[    0.242156] omap2-nand driver initializing
[    0.242309] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[    0.242706] Creating 5 MTD partitions on "omap2-nand.0":
[    0.242736] 0x000000000000-0x000000080000 : "xloader"
[    0.243438] 0x000000080000-0x000000260000 : "uboot"
[    0.244323] 0x000000260000-0x000000280000 : "uboot-env"
[    0.244964] 0x000000280000-0x000000c80000 : "boot"
[    0.247375] 0x000000c80000-0x000020000000 : "rootfs"
[    0.337860] UBI: attaching mtd4 to ubi0
[    1.312530] UBI: scanning is finished
[    1.326721] UBI: attached mtd4 (name "rootfs", size 499 MiB) to ubi0
[    1.326751] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.326751] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.326782] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.326782] UBI: good PEBs: 3996, bad PEBs: 0, corrupted PEBs: 0
[    1.326812] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.326812] UBI: max/mean erase counter: 15/2, WL threshold: 4096, image sequence number: 872408449
[    1.326843] UBI: available PEBs: 0, total reserved PEBs: 3996, PEBs reserved for bad PEB handling: 39
[    1.326873] UBI: attaching mtd3 to ubi1
[    1.327270] UBI: background thread "ubi_bgt0d" started, PID 571
[    1.346984] UBI: scanning is finished
[    1.353790] UBI: attached mtd3 (name "boot", size 10 MiB) to ubi1
[    1.353790] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.353820] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.353820] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.353851] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
[    1.353851] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.353881] UBI: max/mean erase counter: 18/7, WL threshold: 4096, image sequence number: 1151958563
[    1.353881] UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 2
[    1.354064] UBI: background thread "ubi_bgt1d" started, PID 576
[    1.354156] usbcore: registered new interface driver libusual
[    1.354797] mousedev: PS/2 mouse device common for all mice
[    1.355438] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[    1.359741] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[    1.361145] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[    1.362396] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[    1.368591] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    1.369659] i2c /dev entries driver
[    1.374053] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[    1.397735] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.398132] twl4030_wdt twl4030_wdt: Failed to register misc device
[    1.398193] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    1.398773] cpuidle: using governor ladder
[    1.398803] cpuidle: using governor menu
[    1.624298] Registered led device: pandora::sd1
[    1.624542] Registered led device: pandora::sd2
[    1.624786] Registered led device: pandora::bluetooth
[    1.625030] Registered led device: pandora::wifi
[    1.626434] Registered led device: pandora::keypad_bl
[    1.627471] Registered led device: pandora::power
[    1.630187] Registered led device: pandora::charger
[    1.631378] usbcore: registered new interface driver usbhid
[    1.631408] usbhid: USB HID core driver
[    1.633483] OMAP3 Pandora SoC init
[    1.716674] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[    1.718139] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[    1.720428] ALSA device list:
[    1.720428]   #0: omap3pandora
[    1.720581] TCP cubic registered
[    1.720611] NET: Registered protocol family 17
[    1.720672] NET: Registered protocol family 15
[    1.720703] Registering the dns_resolver key type
[    1.720733] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    1.720764] ThumbEE CPU extension supported.
[    1.720794] Registering SWP/SWPB emulation handler
[    1.727264] clock: disabling unused clocks to save power
[    1.728424] registered taskstats version 1
[    1.743347] Console: switching to colour frame buffer device 100x30
[    1.920349] regulator_init_complete: VAUX2: incomplete constraints, leaving on
[    1.922882] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    1.924346] twl_rtc twl_rtc: setting system clock to 2013-03-15 20:28:44 UTC (1363379324)
[    1.926055] UBIFS: background thread "ubifs_bgt0_0" started, PID 671
[    2.004760] UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
[    2.004791] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.004821] UBIFS: FS size: 508612608 bytes (485 MiB, 3942 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    2.004821] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.004852] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7F3FDFE9-E261-4537-ABCD-B44E834867BF, small LPT model
[    2.005706] VFS: Mounted root (ubifs filesystem) on device 0:14.
[    2.006469] devtmpfs: mounted
[    2.006774] Freeing init memory: 196K
[    2.277435] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.279571] mmc0: new high speed SDHC card at address b368
[    2.282745] mmcblk0: mmc0:b368 SDC   30.2 GiB
[    2.284942]  mmcblk0: p1
[    2.954193] udev: starting version 151
[    2.954803] udevd (722): /proc/722/oom_adj is deprecated, please use /proc/722/oom_score_adj instead.
[    3.133850] mmc1: host does not support reading read-only switch. assuming write-enable.
[    3.135955] mmc1: new high speed SDXC card at address 0007
[    3.155426] mmcblk1: mmc1:0007 SD64G 59.7 GiB
[    3.159271]  mmcblk1: p1
[    4.723297] alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.
[    6.521972] mmc2: card claims to support voltages below the defined range. These will be ignored.
[    6.532989] mmc2: new SDIO card at address 0001
[    8.535644] ads7846 spi1.0: touchscreen, irq 254
[    8.536499] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[    9.062713] fuse init (API version 7.17)
[   10.410064] NET: Registered protocol family 10
[   11.708862] FAT-fs (mmcblk0): bogus number of reserved sectors
[   11.708862] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[   11.888488] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   11.890563] zram: num_devices not specified. Using default: 1
[   11.890594] zram: Creating 1 devices ...
[   11.908325] FAT-fs (mmcblk1): invalid media value (0x00)
[   11.908355] FAT-fs (mmcblk1): Can't find a valid FAT filesystem
[   12.348144] UBIFS: background thread "ubifs_bgt1_0" started, PID 1360
[   12.511840] UBIFS: mounted UBI device 1, volume 0, name "boot"(null)
[   12.511871] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   12.511901] UBIFS: FS size: 8386560 bytes (7 MiB, 65 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
[   12.511901] UBIFS: reserved for root: 396117 bytes (386 KiB)
[   12.511932] UBIFS: media format: w4/r0 (latest is w4/r0), UUID A0F267F8-F401-4A2F-8786-75532D72FAC9, small LPT model
[   13.297149] FAT-fs (mmcblk0): bogus number of reserved sectors
[   13.297180] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[   13.449188] FAT-fs (mmcblk1): invalid media value (0x00)
[   13.449218] FAT-fs (mmcblk1): Can't find a valid FAT filesystem
[   13.838775] zram: disk size not provided. You can use disksize_kb module param to specify size.
[   13.838775] Using default: (25% of RAM).
[   13.839141] FAT-fs (zram0): bogus number of reserved sectors
[   13.839172] FAT-fs (zram0): Can't find a valid FAT filesystem
[   14.464721] platform mpu.0: max OPP set to 4
[   14.480712] FAT-fs (zram0): bogus number of reserved sectors
[   14.480743] FAT-fs (zram0): Can't find a valid FAT filesystem
[   14.740356] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[   14.796813] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[   14.942962] Adding 126932k swap on /dev/zram0.  Priority:5 extents:1 across:126932k SS
[   17.733001] SGX clock rate: 200000000
[   37.567199] Bluetooth: Core ver 2.16
[   37.568603] NET: Registered protocol family 31
[   37.568634] Bluetooth: HCI device and connection manager initialized
[   37.568634] Bluetooth: HCI socket layer initialized
[   37.568634] Bluetooth: L2CAP socket layer initialized
[   37.569641] Bluetooth: SCO socket layer initialized
[   47.719543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   48.730316] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   48.730346] sched: RT throttling activated
[   48.730773] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[   48.731781] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   48.746307] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   48.746398] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   48.746398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   48.746429] usb usb1: Product: OMAP-EHCI Host Controller
[   48.746429] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[   48.746429] usb usb1: SerialNumber: ehci-omap.0
[   48.748382] hub 1-0:1.0: USB hub found
[   48.748413] hub 1-0:1.0: 3 ports detected
[   93.011871] usb 1-2: new high-speed USB device number 2 using ehci-omap
[   93.171356] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[   93.171356] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   93.171356] usb 1-2: Manufacturer: RR
[   93.171356] usb 1-2: SerialNumber: 00e04c000001
[  327.473266] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  327.623809] aufs 3.2-20120109
[  327.625091] aufs test_add:261:mount[2127]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[  328.789001] cfg80211: Calling CRDA to update world regulatory domain
[  329.294067] wl1251: using dedicated interrupt line
[  329.386993] ieee80211 phy0: Selected rate control algorithm 'pid'
[  329.387542] wl1251: loaded
[  329.387908] wl1251: initialized
[  330.520233] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[  330.521179] wl1251: firmware booted (Rev 6.0.4.235)
[  330.601837] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  341.876770] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[  342.035614] wlan0: authenticate with 30:85:a9:6b:92:98 (try 1)
[  342.039672] wlan0: authenticated
[  342.039764] wlan0: associate with 30:85:a9:6b:92:98 (try 1)
[  342.043182] wlan0: RX AssocResp from 30:85:a9:6b:92:98 (capab=0x411 status=0 aid=2)
[  342.043182] wlan0: associated
[  342.091888] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  352.957122] wlan0: no IPv6 routers present
[  419.487152] ISO 9660 Extensions: RRIP_1991A
[  419.786773] aufs test_add:261:mount[2469]: uid/gid/perm /mnt/pnd/hdonk_firefox_001 500/501/0755, 0/0/0777
[  642.129302] aufs test_add:261:mount[2718]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[  642.374603] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[  642.389190] cfg80211: Calling CRDA to update world regulatory domain
[  642.391601] wl1251: down
[  642.618347] wl1251: unloaded
[  652.791351] ehci-omap ehci-omap.0: remove, state 1
[  652.791381] usb usb1: USB disconnect, device number 1
[  652.791381] usb 1-2: USB disconnect, device number 2
[  652.821197] ehci-omap ehci-omap.0: USB bus 1 deregistered
[  669.482482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  670.503753] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[  670.504180] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[  670.508300] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[  670.519775] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[  670.519866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  670.519866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  670.519866] usb usb1: Product: OMAP-EHCI Host Controller
[  670.519897] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[  670.519897] usb usb1: SerialNumber: ehci-omap.0
[  670.522064] hub 1-0:1.0: USB hub found
[  670.522094] hub 1-0:1.0: 3 ports detected
[  670.847778] usb 1-2: new high-speed USB device number 2 using ehci-omap
[  671.007202] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[  671.007202] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  671.007202] usb 1-2: Manufacturer: RR
[  671.007232] usb 1-2: SerialNumber: 00e04c000001
[  759.504852] ehci-omap ehci-omap.0: remove, state 1
[  759.504882] usb usb1: USB disconnect, device number 1
[  759.504882] usb 1-2: USB disconnect, device number 2
[  759.534423] ehci-omap ehci-omap.0: USB bus 1 deregistered
[  796.138946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  797.152191] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[  797.153198] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[  797.156158] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[  797.168457] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[  797.168579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  797.168579] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  797.168579] usb usb1: Product: OMAP-EHCI Host Controller
[  797.168609] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[  797.168609] usb usb1: SerialNumber: ehci-omap.0
[  797.176361] hub 1-0:1.0: USB hub found
[  797.176391] hub 1-0:1.0: 3 ports detected
[  820.996246] usb 1-2: new high-speed USB device number 2 using ehci-omap
[  821.155212] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[  821.155242] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  821.155242] usb 1-2: Manufacturer: RR
[  821.155242] usb 1-2: SerialNumber: 00e04c000001
[  922.588806] ehci-omap ehci-omap.0: remove, state 1
[  922.588836] usb usb1: USB disconnect, device number 1
[  922.588867] usb 1-2: USB disconnect, device number 2
[  922.617919] ehci-omap ehci-omap.0: USB bus 1 deregistered
[ 1258.677703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1259.691253] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1259.691711] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 1259.695617] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1259.707122] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1259.707214] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1259.707214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1259.707214] usb usb1: Product: OMAP-EHCI Host Controller
[ 1259.707244] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[ 1259.707244] usb usb1: SerialNumber: ehci-omap.0
[ 1259.709320] hub 1-0:1.0: USB hub found
[ 1259.709350] hub 1-0:1.0: 3 ports detected
[ 1260.035369] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 1260.195007] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[ 1260.195007] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1260.195007] usb 1-2: Manufacturer: RR
[ 1260.195037] usb 1-2: SerialNumber: 00e04c000001
[ 1400.127166] ehci-omap ehci-omap.0: remove, state 1
[ 1400.127197] usb usb1: USB disconnect, device number 1
[ 1400.127227] usb 1-2: USB disconnect, device number 2
[ 1400.155883] ehci-omap ehci-omap.0: USB bus 1 deregistered
[ 1448.142883] aufs test_add:261:mount[3128]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[ 1448.622985] wl1251: using dedicated interrupt line
[ 1448.715148] ieee80211 phy1: Selected rate control algorithm 'pid'
[ 1448.715667] wl1251: loaded
[ 1448.716003] wl1251: initialized
[ 1450.020202] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 1450.021148] wl1251: firmware booted (Rev 6.0.4.235)
[ 1450.086212] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1461.361053] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[ 1461.465301] wlan0: authenticate with 30:85:a9:6b:92:98 (try 1)
[ 1461.469818] wlan0: authenticated
[ 1461.469909] wlan0: associate with 30:85:a9:6b:92:98 (try 1)
[ 1461.473510] wlan0: RX AssocResp from 30:85:a9:6b:92:98 (capab=0x411 status=0 aid=2)
[ 1461.473541] wlan0: associated
[ 1461.513763] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1472.457122] wlan0: no IPv6 routers present
[ 1474.062011] aufs test_add:261:mount[3420]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[ 1474.441802] wl1251: WARNING join timeout
[ 1474.441833] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[ 1474.458435] cfg80211: Calling CRDA to update world regulatory domain
[ 1474.460723] wl1251: down
[ 1474.682495] wl1251: unloaded
[ 1478.627807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1479.644378] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1479.644744] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 1479.649291] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1479.660369] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1479.660461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1479.660461] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1479.660491] usb usb1: Product: OMAP-EHCI Host Controller
[ 1479.660491] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[ 1479.660491] usb usb1: SerialNumber: ehci-omap.0
[ 1479.662567] hub 1-0:1.0: USB hub found
[ 1479.662597] hub 1-0:1.0: 3 ports detected
[ 1479.988494] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 1480.147338] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[ 1480.147338] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1480.147338] usb 1-2: Manufacturer: RR
[ 1480.147338] usb 1-2: SerialNumber: 00e04c000001
pandora:~$

And a lsusb Output from the Terminal:

pandora:~$ lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp.
pandora:~$

Maybe it's a bug or something , i've pluged the Dongle in and out , and shut down the Pandora OS but nothing helped to get it working .

I'm using the internal WiFi for browsing and downloading small Files , and the WiFi Dongle for larger Files or Networking with shared Folders over Gigolo,

because of the amazing download Speed of 4-5 MB/s  :)  .

Hopefully this can be fixed .

Greeting , Shao

Edit:

For the OS Update i'd used the "Upgrade Pandora OS" from the start Menu .

The File  /etc/modprobe.conf Shows me the following text inside :

blacklist wl1251_sdio

blacklist rtl8192cu
 
Last edited by a moderator:
My USB Wifi Dongle (which is has the rtl8192cu chipset) doesn't work anymore when I upgraded to it. Also, the charging LED didn't come one when my Pandora was turned on via an AC Adapter.
Strange, the driver is still there. What's in your /etc/modprobe.conf ?
It has the following:



Code:
blacklist wl1251_sdio
blacklist rtl8192cu
 
 
Tried to remove the blacklist rtl18192cu line and rebooted?
 
That is the same modprobe.conf as pre-1.54RC (I have not tested this yet, just noting).
 
Back
Top