As it seems all the bugs were fixed in v1.70RC, it's time to release the final v1.70.
Note: if you are going to install the update through "Upgrade Pandora OS", from v1.61 or lower, you need to make sure to run the update to completion. If the update fails for some reason, like Internet connection problems, please run the update again and let if finish. After it successfully finishes (but not earlier), you need to reboot as the system may be unstable until restart due to updated libs.
(It is suggested to run it at least twice, to make sure all packages are installed properly!)
However, since a LOT has changed, be prepared that the update fails and you might need to do a full flash!
Here are the fixes since v1.70RC:
DOWNLOAD AND INSTALLATION INSTRUCTIONS:
Upgrading from a previous SuperZaxxon version (1.5x or newer):
Use the "Upgrade Pandora OS"-Version (PLEASE READ NOTE ABOVE!)
Please note:
User-Modified configs will not not be overwritten with the new version.
Be sure to backup any important data you might have in your NAND for the above reasons.
It is recommended to do a full flash in case you are encountering any issues.
Upgrade instructions using the Full-Flash-Image:
Download SuperZaxxon Final v1.70 (Temporarily disabled due to an OPKG error)
Please note: Flashing the new firmware will put your unit back into a default state. All your settings and users will be lost. Of course, this does not apply to PNDs which save their stuff on the SD-Card.
To install it, simply extract the archive onto the root of your SD Card.
Insert the SD Card into the left slot. Keep R (shoulder) pressed while switching on your Pandora and select "Boot from SD1"
It will then flash the firmware onto the NAND. After it's finished, reboot your Pandora and patiently wait until the First Boot Wizard appears on the screen.
If "Boot from SD1" doesn't appear, try to reformat the SD Card using Panasonic SD Formatter, recopy the files and retry.
Enjoy
Note: if you are going to install the update through "Upgrade Pandora OS", from v1.61 or lower, you need to make sure to run the update to completion. If the update fails for some reason, like Internet connection problems, please run the update again and let if finish. After it successfully finishes (but not earlier), you need to reboot as the system may be unstable until restart due to updated libs.
(It is suggested to run it at least twice, to make sure all packages are installed properly!)
However, since a LOT has changed, be prepared that the update fails and you might need to do a full flash!
Here are the fixes since v1.70RC:
- FIX: Bug in Fussili-Client has been fixed (thanks to Ziz)
DOWNLOAD AND INSTALLATION INSTRUCTIONS:
Upgrading from a previous SuperZaxxon version (1.5x or newer):
Use the "Upgrade Pandora OS"-Version (PLEASE READ NOTE ABOVE!)
Please note:
User-Modified configs will not not be overwritten with the new version.
Be sure to backup any important data you might have in your NAND for the above reasons.
It is recommended to do a full flash in case you are encountering any issues.
Upgrade instructions using the Full-Flash-Image:
Please note: Flashing the new firmware will put your unit back into a default state. All your settings and users will be lost. Of course, this does not apply to PNDs which save their stuff on the SD-Card.
To install it, simply extract the archive onto the root of your SD Card.
Insert the SD Card into the left slot. Keep R (shoulder) pressed while switching on your Pandora and select "Boot from SD1"
It will then flash the firmware onto the NAND. After it's finished, reboot your Pandora and patiently wait until the First Boot Wizard appears on the screen.
If "Boot from SD1" doesn't appear, try to reformat the SD Card using Panasonic SD Formatter, recopy the files and retry.
Enjoy
Last edited by a moderator: