[    0.000000] Linux version 3.2.63 (notaz@pixelinis) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1041 Tue Sep 16 01:28:22 EEST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Pandora Handheld Console
[    0.000000] cma: CMA: reserved 4 MiB at 86000000
[    0.000000] Initialized persistent memory from 80fe0000-80ffffff
[    0.000000] cma: CMA: reserved 64 MiB at 9c000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c05af450, node_mem_map c05df000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130048 pages, LIFO batch:31
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 443844k/443844k available, 80444k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0541620   (5350 kB)
[    0.000000]       .init : 0xc0542000 - 0xc0572000   ( 192 kB)
[    0.000000]       .data : 0xc0572000 - 0xc05afbc0   ( 247 kB)
[    0.000000]        .bss : 0xc05afbe4 - 0xc05defd0   ( 189 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000152] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.039123] pid_max: default: 32768 minimum: 301
[    0.039398] Mount-cache hash table entries: 512
[    0.039764] Initializing cgroup subsys devices
[    0.039825] CPU: Testing write buffer coherency: ok
[    0.040039] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.040130] Setting up static identity map for 0x803e5550 - 0x803e55a8
[    0.040710] devtmpfs: initialized
[    0.055755] print_constraints: dummy: 
[    0.060211] NET: Registered protocol family 16
[    0.061950] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.062347] GPMC revision 5.0
[    0.065490] OMAP GPIO hardware version 2.5
[    0.068786] omap_mux_init: Add partition: #1: core, flags: 0
[    0.075622] Reprogramming SDRC clock to 400000000 Hz
[    0.077911] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.085205]  omap-mcbsp.2: alias fck already exists
[    0.085510]  omap-mcbsp.3: alias fck already exists
[    0.087066] OMAP DMA hardware revision 5.0
[    0.101196] bio: create slab <bio-0> at 0
[    0.102416] print_constraints: vwlan: 1800 mV 
[    0.103942] SCSI subsystem initialized
[    0.106292] usbcore: registered new interface driver usbfs
[    0.106536] usbcore: registered new interface driver hub
[    0.106781] usbcore: registered new device driver usb
[    0.108093] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.112701] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.112792] twl4030: power (irq 373) chaining IRQs 376..383
[    0.113342] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.113769] _omap_mux_init_gpio: Could not set gpio192
[    0.114898] _omap_mux_init_gpio: Could not set gpio193
[    0.117492] print_constraints: VUSB1V5: 1500 mV normal standby
[    0.118133] print_constraints: VUSB1V8: 1800 mV normal standby
[    0.118713] print_constraints: VUSB3V1: 3100 mV normal standby
[    0.179809] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.181121] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal 
[    0.181701] print_constraints: vdd_core: 600 <--> 1450 mV normal 
[    0.182434] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.183105] print_constraints: VDAC: 1800 mV normal standby
[    0.183746] print_constraints: VAUX2: 1800 mV normal standby
[    0.184387] print_constraints: VPLL2: 1800 mV normal standby
[    0.185058] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.185668] print_constraints: VSIM: 2800 mV normal standby
[    0.186309] print_constraints: VAUX1: 3000 mV normal standby
[    0.186920] print_constraints: VAUX4: 3000 mV normal standby
[    0.187438] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[    0.189880] omap-iommu omap-iommu.0: isp registered
[    0.190429] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.191314] Switching to clocksource 32k_counter
[    0.213226] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.218536] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.218566] musb-hdrc: MHDRC RTL version 1.800 
[    0.218597] musb-hdrc: setup fifo_mode 4
[    0.218597] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.219116] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    0.220153] NET: Registered protocol family 2
[    0.229217] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.229522] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.229858] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.230072] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230102] TCP reno registered
[    0.230102] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230133] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.230346] NET: Registered protocol family 1
[    0.230621] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.235992] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.251495] VFS: Disk quotas dquot_6.5.2
[    0.251983] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.256927] msgmni has been set to 1002
[    0.258331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.258361] io scheduler noop registered
[    0.258392] io scheduler deadline registered
[    0.258422] io scheduler cfq registered (default)
[    0.273315] OMAP DSS rev 2.0
[    0.276641] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    0.277099] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    0.277587] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    0.277984] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    0.284484] loop: module loaded
[    0.284912] platform iva.0: IVA freq set to 660MHz
[    0.284942] OMAP overclocker loaded.
[    0.287170] omap2-nand driver initializing
[    0.287322] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[    0.287750] Creating 5 MTD partitions on "omap2-nand.0":
[    0.287780] 0x000000000000-0x000000080000 : "xloader"
[    0.288513] 0x000000080000-0x000000260000 : "uboot"
[    0.289428] 0x000000260000-0x000000280000 : "uboot-env"
[    0.290069] 0x000000280000-0x000000c80000 : "boot"
[    0.292449] 0x000000c80000-0x000020000000 : "rootfs"
[    0.383514] UBI: attaching mtd4 to ubi0
[    1.358215] UBI: scanning is finished
[    1.372589] UBI: attached mtd4 (name "rootfs", size 499 MiB) to ubi0
[    1.372589] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.372619] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.372619] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.372650] UBI: good PEBs: 3996, bad PEBs: 0, corrupted PEBs: 0
[    1.372650] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.372680] UBI: max/mean erase counter: 44/6, WL threshold: 4096, image sequence number: 509019717
[    1.372680] UBI: available PEBs: 0, total reserved PEBs: 3996, PEBs reserved for bad PEB handling: 39
[    1.372741] UBI: attaching mtd3 to ubi1
[    1.373107] UBI: background thread "ubi_bgt0d" started, PID 527
[    1.392883] UBI: scanning is finished
[    1.399749] UBI: attached mtd3 (name "boot", size 10 MiB) to ubi1
[    1.399780] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.399780] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.399810] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.399810] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
[    1.399810] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.399841] UBI: max/mean erase counter: 19/7, WL threshold: 4096, image sequence number: 787521168
[    1.399841] UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 2
[    1.400054] UBI: background thread "ubi_bgt1d" started, PID 532
[    1.400146] usbcore: registered new interface driver libusual
[    1.400756] mousedev: PS/2 mouse device common for all mice
[    1.401367] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[    1.405700] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[    1.406921] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[    1.408233] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[    1.414459] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    1.415527] i2c /dev entries driver
[    1.419921] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[    1.447875] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.448272] twl4030_wdt twl4030_wdt: Failed to register misc device
[    1.448333] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    1.448760] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
[    1.448791] platform mpu.0: omap_target: unable to scale voltage up.
[    1.449188] cpuidle: using governor ladder
[    1.449188] cpuidle: using governor menu
[    1.678771] Registered led device: pandora::sd1
[    1.678955] Registered led device: pandora::sd2
[    1.679138] Registered led device: pandora::bluetooth
[    1.679290] Registered led device: pandora::wifi
[    1.680450] Registered led device: pandora::keypad_bl
[    1.681579] Registered led device: pandora::power
[    1.684417] Registered led device: pandora::charger
[    1.685302] usbcore: registered new interface driver usbhid
[    1.685302] usbhid: USB HID core driver
[    1.685485] persistent_ram: uncorrectable error in header
[    1.685485] persistent_ram: no valid data in buffer (sig = 0xfffffeef)
[    1.686004] console [ram-1] enabled
[    1.687652] OMAP3 Pandora SoC init
[    1.763732] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[    1.764831] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[    1.766632] ALSA device list:
[    1.766632]   #0: omap3pandora
[    1.766754] TCP cubic registered
[    1.766754] NET: Registered protocol family 17
[    1.766784] Registering the dns_resolver key type
[    1.766845] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    1.766845] ThumbEE CPU extension supported.
[    1.766876] Registering SWP/SWPB emulation handler
[    1.771911] clock: disabling unused clocks to save power
[    1.772796] registered taskstats version 1
[    1.783416] Console: switching to colour frame buffer device 100x30
[    1.963562] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    1.965240] twl_rtc twl_rtc: setting system clock to 2014-09-17 13:32:45 UTC (1410960765)
[    1.966552] UBIFS: background thread "ubifs_bgt0_0" started, PID 632
[    2.048706] UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
[    2.048736] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.048736] UBIFS: FS size: 508612608 bytes (485 MiB, 3942 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    2.048767] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.048767] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3234489E-AD5D-47B1-9185-67A86C6B3788, small LPT model
[    2.051055] VFS: Mounted root (ubifs filesystem) on device 0:14.
[    2.053070] devtmpfs: mounted
[    2.053253] Freeing init memory: 192K
[    2.148223] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.150177] mmc0: new high speed SDXC card at address 0007
[    2.151733] mmcblk0: mmc0:0007 SD128 116 GiB 
[    2.153778]  mmcblk0: unknown partition table
[    2.686584] mmc1: host does not support reading read-only switch. assuming write-enable.
[    2.688476] mmc1: new high speed SDXC card at address 0007
[    2.688964] mmcblk1: mmc1:0007 SD128 116 GiB 
[    2.690490]  mmcblk1: unknown partition table
[    2.789794] mmc2: card claims to support voltages below the defined range. These will be ignored.
[    2.790893] mmc2: new SDIO card at address 0001
[    2.867034] udevd (685): /proc/685/oom_adj is deprecated, please use /proc/685/oom_score_adj instead.
[    4.007537] EXT3-fs (mmcblk1): error: unrecognized mount option "umask=0" or missing value
[    4.078155] EXT3-fs (mmcblk0): error: unrecognized mount option "umask=0" or missing value
[    4.106201] kjournald starting.  Commit interval 5 seconds
[    4.106384] EXT3-fs (mmcblk1): warning: mounting fs with errors, running e2fsck is recommended
[    4.158630] ads7846 spi1.0: touchscreen, irq 254
[    4.159454] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[    4.182708] kjournald starting.  Commit interval 5 seconds
[    4.324829] EXT3-fs (mmcblk1): using internal journal
[    4.324829] EXT3-fs (mmcblk1): mounted filesystem with ordered data mode
[    4.417266] EXT3-fs (mmcblk0): using internal journal
[    4.417297] EXT3-fs (mmcblk0): mounted filesystem with ordered data mode
[    4.604003] alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.
[    4.779632] fuse init (API version 7.17)
[    4.867004] NET: Registered protocol family 10
[    4.977661] zram: module is from the staging directory, the quality is unknown, you have been warned.
[    4.979187] zram: num_devices not specified. Using default: 1
[    4.979217] zram: Creating 1 devices ...
[    5.119018] UBIFS: background thread "ubifs_bgt1_0" started, PID 1029
[    5.196533] UBIFS: mounted UBI device 1, volume 0, name "boot"(null)
[    5.196533] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.196563] UBIFS: FS size: 8386560 bytes (7 MiB, 65 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
[    5.196563] UBIFS: reserved for root: 396117 bytes (386 KiB)
[    5.196594] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6803A8A4-8D98-4C1C-9155-8179D8680532, small LPT model
[    5.682861] zram: disk size not provided. You can use disksize_kb module param to specify size.
[    5.682891] Using default: (25% of RAM).
[    5.683197] FAT-fs (zram0): bogus number of reserved sectors
[    5.683349] FAT-fs (zram0): Can't find a valid FAT filesystem
[    5.683532] EXT2-fs (zram0): error: can't find an ext2 filesystem on dev zram0.
[    5.683776] EXT3-fs (zram0): error: can't find ext3 filesystem on dev zram0.
[    5.683929] EXT4-fs (zram0): VFS: Can't find ext4 filesystem
[    5.684204] FAT-fs (zram0): bogus number of reserved sectors
[    5.684265] FAT-fs (zram0): Can't find a valid FAT filesystem
[    6.229827] FAT-fs (zram0): bogus number of reserved sectors
[    6.229980] FAT-fs (zram0): Can't find a valid FAT filesystem
[    6.230133] EXT2-fs (zram0): error: can't find an ext2 filesystem on dev zram0.
[    6.230285] EXT3-fs (zram0): error: can't find ext3 filesystem on dev zram0.
[    6.230377] EXT4-fs (zram0): VFS: Can't find ext4 filesystem
[    6.230651] FAT-fs (zram0): bogus number of reserved sectors
[    6.230743] FAT-fs (zram0): Can't find a valid FAT filesystem
[    8.004302] platform mpu.0: max MPU OPP set to 3
[    8.223541] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[    8.274475] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[    8.343811] Adding 128412k swap on /dev/zram0.  Priority:5 extents:1 across:128412k SS
[    8.978424] SGX clock rate: 200000000
[    9.543548]  gadget: using random self ethernet address
[    9.543579]  gadget: using random host ethernet address
[    9.546417] usb0: MAC 02:ab:34:42:e2:74
[    9.546447] usb0: HOST MAC 7a:4f:d3:8d:ef:8c
[    9.558776]  gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[    9.558807]  gadget: g_cdc ready
[    9.564819] musb-hdrc musb-hdrc: MUSB HDRC host driver
[    9.564941] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[    9.565032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.565063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.565063] usb usb1: Product: MUSB HDRC host driver
[    9.565063] usb usb1: Manufacturer: Linux 3.2.63 musb-hcd
[    9.565063] usb usb1: SerialNumber: musb-hdrc
[    9.566925] hub 1-0:1.0: USB hub found
[    9.566955] hub 1-0:1.0: 1 port detected
[   24.738220] Bluetooth: Core ver 2.16
[   24.744140] NET: Registered protocol family 31
[   24.744140] Bluetooth: HCI device and connection manager initialized
[   24.744171] Bluetooth: HCI socket layer initialized
[   24.744171] Bluetooth: L2CAP socket layer initialized
[   24.745544] Bluetooth: SCO socket layer initialized
[   86.231597] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   86.398498] aufs 3.2-20120109
[   86.399780] aufs test_add:261:mount[1768]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[   87.861846] cfg80211: Calling CRDA to update world regulatory domain
[   88.191650] wl1251: using dedicated interrupt line
[   88.285552] ieee80211 phy0: Selected rate control algorithm 'pid'
[   88.286132] wl1251: loaded
[   88.286468] wl1251: initialized
[   89.394836] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[   89.394927] wl1251: firmware booted (Rev 6.0.4.235)
[   89.459045] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   96.490570] wlan0: deauthenticating from 48:f8:b3:63:a4:da by local choice (reason=3)
[   96.566864] wlan0: authenticate with 48:f8:b3:63:a4:da (try 1)
[   96.589233] wlan0: authenticated
[   96.691772] wlan0: associate with 48:f8:b3:63:a4:da (try 1)
[   96.720092] wlan0: RX AssocResp from 48:f8:b3:63:a4:da (capab=0x411 status=0 aid=3)
[   96.720123] wlan0: associated
[   96.731018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  101.894134] aufs test_add:261:mount[2110]: uid/gid/perm /mnt/pnd/jumanji 1000/100/0755, 1000/1001/0755
[  107.504028] wlan0: no IPv6 routers present
[ 5727.307861] aufs test_add:261:mount[2948]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[ 5727.489685] wlan0: deauthenticating from 48:f8:b3:63:a4:da by local choice (reason=3)
[ 5727.504608] wl1251: ERROR command 12 returned 14
[ 5727.518249] cfg80211: Calling CRDA to update world regulatory domain
[ 5727.535675] wl1251: down
[ 5727.758178] wl1251: unloaded
[ 5732.070434] musb-hdrc musb-hdrc: remove, state 4
[ 5732.070465] usb usb1: USB disconnect, device number 1
[ 5732.073883] musb-hdrc musb-hdrc: USB bus 1 deregistered
[ 5733.263488] PM: Syncing filesystems ... done.
[ 5733.432586] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5733.449676] Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
[ 5733.486907] Suspending console(s) (use no_console_suspend to debug)
[ 5733.599060] PM: suspend of devices complete after 111.782 msecs
[ 5733.599426] PM: late suspend of devices complete after 0.366 msecs
[ 6642.603027] Successfully put all powerdomains to target state
[ 6642.603607] PM: early resume of devices complete after 0.457 msecs
[ 6643.757263] PM: resume of devices complete after 1153.534 msecs
[ 6643.758026] Restarting tasks ... done.
[ 6644.152496]  gadget: using random self ethernet address
[ 6644.152496]  gadget: using random host ethernet address
[ 6644.158172] usb0: MAC e6:95:9a:b0:d1:8b
[ 6644.158203] usb0: HOST MAC ba:85:af:f3:b6:6a
[ 6644.171173]  gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[ 6644.171203]  gadget: g_cdc ready
[ 6644.184600] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 6644.184692] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[ 6644.184783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6644.184814] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6644.184814] usb usb1: Product: MUSB HDRC host driver
[ 6644.184814] usb usb1: Manufacturer: Linux 3.2.63 musb-hcd
[ 6644.184844] usb usb1: SerialNumber: musb-hdrc
[ 6644.186798] hub 1-0:1.0: USB hub found
[ 6644.186828] hub 1-0:1.0: 1 port detected
[ 6646.729858] aufs test_add:261:mount[3389]: uid/gid/perm /mnt/pnd/op_usbhost 1000/100/0755, 0/0/0777
[ 6646.983001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6647.991882] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 6647.995513] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[ 6647.998748] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 6648.007873] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 6648.007965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6648.007965] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6648.007965] usb usb2: Product: OMAP-EHCI Host Controller
[ 6648.007995] usb usb2: Manufacturer: Linux 3.2.63 ehci_hcd
[ 6648.007995] usb usb2: SerialNumber: ehci-omap.0
[ 6648.009887] hub 2-0:1.0: USB hub found
[ 6648.009918] hub 2-0:1.0: 3 ports detected
[ 6690.367248] usb 2-2: new high-speed USB device number 2 using ehci-omap
[ 6690.547180] usb 2-2: New USB device found, idVendor=2040, idProduct=7200
[ 6690.547180] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=10
[ 6690.547210] usb 2-2: Product: WinTV HVR-950
[ 6690.547210] usb 2-2: Manufacturer: Hauppauge
[ 6690.547210] usb 2-2: SerialNumber: 4032677588
[ 6691.196105] WARNING: You are using an experimental version of the media stack.
[ 6691.196105] 	As the driver is backported to an older kernel, it doesn't offer
[ 6691.196105] 	enough quality for its usage in production.
[ 6691.196136] 	Use it with care.
[ 6691.196136] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 6691.196136] 	b250392f7b5062cf026b1423e27265e278fd6b30 [media] media: ttpci: fix av7110 build to be compatible with CONFIG_INPUT_EVDEV
[ 6691.196136] 	85c1abcb5251673d18325576f4923bb78af479de [media] usbtv: Make it dependent on ALSA
[ 6691.196136] 	66cae53024c4b73d40b4e78c557a73e082522aed [media] media: fix au0828 dvb suspend/resume to call dvb_frontend_suspend/resume
[ 6691.201782] media: Linux media interface: v0.10
[ 6691.225738] Linux video capture interface: v2.00
[ 6691.225769] WARNING: You are using an experimental version of the media stack.
[ 6691.225769] 	As the driver is backported to an older kernel, it doesn't offer
[ 6691.225769] 	enough quality for its usage in production.
[ 6691.225769] 	Use it with care.
[ 6691.225769] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 6691.225799] 	b250392f7b5062cf026b1423e27265e278fd6b30 [media] media: ttpci: fix av7110 build to be compatible with CONFIG_INPUT_EVDEV
[ 6691.225799] 	85c1abcb5251673d18325576f4923bb78af479de [media] usbtv: Make it dependent on ALSA
[ 6691.225799] 	66cae53024c4b73d40b4e78c557a73e082522aed [media] media: fix au0828 dvb suspend/resume to call dvb_frontend_suspend/resume
[ 6691.249816] WARNING: You are using an experimental version of the media stack.
[ 6691.249847] 	As the driver is backported to an older kernel, it doesn't offer
[ 6691.249847] 	enough quality for its usage in production.
[ 6691.249847] 	Use it with care.
[ 6691.249847] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 6691.249847] 	b250392f7b5062cf026b1423e27265e278fd6b30 [media] media: ttpci: fix av7110 build to be compatible with CONFIG_INPUT_EVDEV
[ 6691.249877] 	85c1abcb5251673d18325576f4923bb78af479de [media] usbtv: Make it dependent on ALSA
[ 6691.249877] 	66cae53024c4b73d40b4e78c557a73e082522aed [media] media: fix au0828 dvb suspend/resume to call dvb_frontend_suspend/resume
[ 6691.263977] au0828: au0828 driver loaded
[ 6691.651885] au0828: i2c bus registered
[ 6691.846008] tveeprom 4-0050: Hauppauge model 72001, rev B3F0, serial# 6145748
[ 6691.846008] tveeprom 4-0050: MAC address is 00:0d:fe:5d:c6:d4
[ 6691.846038] tveeprom 4-0050: tuner model is Xceive XC5000 (idx 150, type 76)
[ 6691.846038] tveeprom 4-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[ 6691.846038] tveeprom 4-0050: audio processor is AU8522 (idx 44)
[ 6691.846069] tveeprom 4-0050: decoder processor is AU8522 (idx 42)
[ 6691.846069] tveeprom 4-0050: has no radio, has IR receiver, has no IR transmitter
[ 6691.846069] au0828: hauppauge_eeprom: hauppauge eeprom: model=72001
[ 6691.994110] au8522 4-0047: creating new instance
[ 6691.994140] au8522_decoder creating new instance...
[ 6692.148040] tuner 4-0061: Tuner -1 found with type(s) Radio TV.
[ 6692.201019] xc5000 4-0061: creating new instance
[ 6692.207794] xc5000: Successfully identified at address 0x61
[ 6692.207824] xc5000: Firmware has not been loaded previously
[ 6693.182678] au8522 4-0047: attaching existing instance
[ 6693.189483] xc5000 4-0061: attaching existing instance
[ 6693.196228] xc5000: Successfully identified at address 0x61
[ 6693.196258] xc5000: Firmware has not been loaded previously
[ 6693.196258] DVB: registering new adapter (au0828)
[ 6693.196258] usb 2-2: DVB: registering adapter 0 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)...
[ 6693.473449] rc_hauppauge: disagrees about version of symbol rc_map_register
[ 6693.473480] rc_hauppauge: Unknown symbol rc_map_register (err -22)
[ 6693.473510] rc_hauppauge: disagrees about version of symbol rc_map_unregister
[ 6693.473510] rc_hauppauge: Unknown symbol rc_map_unregister (err -22)
[ 6693.499877] IR keymap rc-hauppauge not found
[ 6693.500000] Registered IR keymap rc-empty
[ 6693.500305] input: au0828 IR (Hauppauge HVR950Q) as /devices/platform/usbhs-omap.0/ehci-omap.0/usb2/2-2/rc/rc0/input8
[ 6693.505798] rc0: au0828 IR (Hauppauge HVR950Q) as /devices/platform/usbhs-omap.0/ehci-omap.0/usb2/2-2/rc/rc0
[ 6693.616973] au0828: Remote controller au0828 IR (Hauppauge HVR950Q) initalized
[ 6693.616973] au0828: Registered device AU0828 [Hauppauge HVR950Q]
[ 6693.617187] usbcore: registered new interface driver au0828
[ 6693.813812] IR NEC protocol handler initialized
[ 6693.840270] IR RC5(x/sz) protocol handler initialized
[ 6693.880096] IR JVC protocol handler initialized
[ 6693.881835] IR Sony protocol handler initialized
[ 6693.885589] IR RC6 protocol handler initialized
[ 6693.887939] IR Sharp protocol handler initialized
[ 6693.901336] input: MCE IR Keyboard/Mouse (au0828-input) as /devices/virtual/input/input9
[ 6693.902221] IR MCE Keyboard/mouse protocol handler initialized
[ 6693.918151] lirc_dev: IR Remote Control driver registered, major 244 
[ 6693.919830] IR SANYO protocol handler initialized
[ 6693.927795] IR XMP protocol handler initialized
[ 6693.972473] rc rc0: lirc_dev: driver ir-lirc-codec (au0828-input) registered at minor = 0
[ 6693.972503] IR LIRC bridge handler initialized
[ 6694.033782] usbcore: registered new interface driver snd-usb-audio
[ 6778.132965] xc5000: Upload failed. (file not found?)
[ 6778.133117] xc5000: Unable to initialise tuner
[ 6839.132720] xc5000: Upload failed. (file not found?)